Manual

GigaX2024B/M L2 Managed Switch CLI Manual
46
No/clear
No spanning-tree hello time
Show
show spanning-tree port detail IFNAME
Default
2 sec
Description
Use the spanning-tree cost conguration command on the
switch stack or standalone switch to set the hello time to send
hello BPDUs.
Example
ASUS(cong)# spanning-tree hello time 2
10.33 spanning-tree link-type (auto|point-to-
point|shared)
Syntax
spanning-tree link-type (auto|point-to-point|shared)
Parameters
link-type the link type for the Rapid Spanning Tree
auto -> automatically determines if the interface is
attached to a point-to-point link or to shared
media
point-to-point -> a connection to exactly one other bridge
shared -> a connection to two or more bridges
Command Mode
Interface mode
No/clear
no spanning-tree link-type
Show
show spanning-tree port detail IFNAME
Default
None or depends on ODM customer
Description
Use the spanning-tree cost conguration command on the
switch stack or standalone switch to set the spanning-tree link
type for the Rapid Spanning Tree
Example
ASUS(cong-if)# spanning-tree link-type auto
10.34 spanning-treemax-age<6-40>
Syntax
spanning-tree max-age <6-40>
Parameters
max-age the interval (sec) between messages the
spanning tree receives from the root switch
<6-40> Valid range is 6~40 secs