Manual

GigaX2024B/M L2 Managed Switch CLI Manual
27
Command Mode
Congure terminal mode
No/clear
No low-queue delay bound
Show
show qos mode
Default
The default setting of qos mode is highrst mode
Description
This command sets qos mode to highrst mode
Example
ASUS(cong)# cos policy strict
8.5 show cos policy
Syntax
show cos policy
Parameters
qos quality of service (QoS)
mode CoS Scheduling mode of IEEE 802.1p
Command Mode
Privileged EXEC mode
No/clear
no max bridge transmit delay bound
Show
show max bridge transmit delay bound
Default
Description
This command show the qos mode.
Example
ASUS# show cos policy
8.6 show qos egress bandwidth [IFNAME]
Syntax
show qos egress bandwidth [IFNAME]
Parameters
egress Egress keyword
[IFNAME] Interface’s name, ex: fa1/0/1 or fa1/0/12
Command Mode
Privileged EXEC mode
No/clear
Show
Default
None or depends on ODM customer
Description
This command used to show the Qos bandwidth informational
parameter for the outcoming packets.
Example
ASUS# show qos egress bandwidth fa1/0/1