Manual

GigaX2024B/M L2 Managed Switch CLI Manual
25
7.4 no mirror session <1-8> source IFLIST
Syntax
no mirror session <1-8> source IFLIST
Parameters
no Negate a command or set its defaults
IFLIST source interface list ,ex fa1/0/1,fa1/0/3-5,fai1/0/7
Command Mode
Congure terminal mode
Show
show mirror session
Default
There are some mirroring rules on Switch.
Description
This command resets the source interfaces’ received or
transmitted trafc or both the destination interface.
Example
ASUS(cong)#no mirror session 1 source fa1/0/2-4
8. QoS/CoS
8.1 coscos-mapPRIORITYQUEUE
GX2024B Queue range is 1-4
Syntax
cos cos-map <0-7> <1-6>
Parameters
PRIORITY 802.1p priority
QUEUE internal class of service queues
Command Mode
Congure terminal mode
No/clear
no cos cos-map
Show
show cos cos-map
Default
None or depends on ODM customer
Description
Use the queue cos-map conguration command on the switch
stack or standalone switch to set which Cos queue a given
priority should map into.
Example
ASUS(cong)#cos cos-map 3 1
8.2 show cos cos-map
Syntax
show cos cos-map