Manual

GigaX2024B/M L2 Managed Switch CLI Manual
16
Command Mode
Interface mode
No/clear
switchport trunk allowed vlan remove VLANLIST
Show
show vlan [VLANID]
Default
None or depends on ODM customer
Description
Use the switchport trunk allowed vlan conguration command
on the switch stack or standalone switch to add or remove the
allowed VLANs that can receive and send trafc on this interface
in tagged format when in trunking mode
Example
ASUS(cong-if)# switchport trunk allowed vlan add 2-20
6. 802.1x:
6.1 dot1xguest-vlan<1-3000>
Syntax
dot1x guest-vlan <1-3000>
Parameters
<1-3000> valid vlan-id range is from 1 to 3000
Command Mode
Interface mode
No/clear
no dot1x guest-vlan
Show
show dot1x all / show dot1x interface IFNAME
Default
No default guest vlan
Description
Use the dot1x guest-vlan interface conguration command
on the switch stack or on a standalone switch to specify an
active VLAN as an 802.1X guest VLAN. Use the no form of this
command to return to the default setting.
Example
ASUS(cong-if)#dot1x guest-vlan 2
6.2 dot1xmax-req<1-10>
Syntax
dot1x max-req <1-10>
Parameters
<1-10> max-req times ; valid values are from 1 to 10
Command Mode
Interface mode
No/clear
no dot1x max-req
Show
show dot1x all