Manual

GigaX2024B/M L2 Managed Switch CLI Manual
199
tx -> sets whether the interface can send ow-
control packets to a remote device
both -> sets whether the interface can receive and
send ow-control packets from a remote device
off -> disable an interface to operate with an
attached device that is required to send or receive ow-control
packets
on -> allows an interface to operate with an
attached device that is required to send or receive ow-control
packets
Command Mode
Interface mode
No/clear
No owcontrol
Show
show interface IFNAME
Default
receive on, send on
Description
This command sets the interface owcontrol method.
Examples
ASUS(cong-if)# owcontrol both on
15.13 auto-negotiation
Syntax
auto-negotiation
Parameters
Command Mode
Interface mode
No/clear
no auto-negotiation
Show
show l2_interface IFNAME
Default
None or depends on ODM customer
Description
Use the auto-negotiation conguration command on the switch
stack or standalone switch to set auto-negotiation status of the
port.
Examples
ASUS(cong-if)# auto-negotiation
15.14 speed (10|100|1000)
Syntax
speed (10|100|1000)
Parameters