Manual

GigaX2024B/M L2 Managed Switch CLI Manual
187
IPADDR destination address
MASK destination wildcard bits
<0-255> ICMP message type
[IFNAME] Egress interface name
Command Mode
Congure terminal mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit) icmp
host IPADDR IPADDR MASK <0-255> [IFNAME]
Show
Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples
ASUS(cong)#access-list 100 permit icmp host 10.0.0.1 10.0.0.4
0.0.0.0 1
13.121 access-list (<100-199>|<2000-2699>)
(deny|permit) icmp host IPADDR host IPADDR
<0-255> [IFNAME]
Syntax
access-list (<100-199>|<2000-2699>) (deny|permit) icmp host
IPADDR host IPADDR <0-255> [IFNAME]
Parameters
Access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit-> Specify packets to forward
deny-> Specify packets to reject.
Icmp-> Internet Control Message Protocol
.host A single Source host
IPADDR Source address
.host A single destination host
IPADDR Destination address
<0-255> ICMP message type