Manual

GigaX2024B/M L2 Managed Switch CLI Manual
166
permit-> Specify packets to forward
deny-> Specify packets to reject.
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
IPADDR Source address
MASK Source wildcard bits
IPADDR Destination address
MASK Destination wildcard bits
eq Match only packets on a given port numbe
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode
Congure terminal mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
IPADDR MASK IPADDR MASK eq <0-65535> [IFNAME]
Show
Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples
ASUS(cong)#access-list 100 permit tcp 1.1.1.1 0.0.0.0 1.1.1.4
0.0.0.0 eq 21
13.99 access- list ( <100 -199 >|<2 000- 2699 >)
(deny|permit) (tcp|udp) IPADDR MASK [eq]
[<0-65535>]IPADDRMASK[IFNAME]
Syntax
access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
IPADDR MASK [eq] [<0-65535>] IPADDR MASK [IFNAME]
Parameters
Access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit-> Specify packets to forward