Manual
GigaX2024B/M L2 Managed Switch CLI Manual
125
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples
ASUS(cong-ext-acl)#permit tcp host 10.0.0.1 eq 2 host 10.0.0.2
[fa1/0/1]
13.50 (permit|deny) (tcp|udp) host IPADDR host
IPADDR [eq] [<0-65535>] [IFNAME]
Syntax
(permit|deny) (tcp|udp) host IPADDR host IPADDR [eq]
[<0-65535>] [IFNAME]
Parameters
permit-> Specify packets to forward
deny-> Specify packets to reject.
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
host A single source host
IPADDR Source address
host A single destination host
IPADDR Destination address
eq Match only packets on a given port numbe
<0-65535> Port number
[IFNAME] Egress interface name
Command Mode
IP extended access-list mode
No/clear
no (permit|deny) (tcp|udp) host IPADDR host IPADDR [eq]
[<0-65535>] [IFNAME]
Show
Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples
ASUS(cong-ext-acl)# permit tcp host 10.0.0.1 host 10.0.0.2 eq
2 [fa1/0/1]