Manual

GigaX2024B/M L2 Managed Switch CLI Manual
113
deny-> Specify packets to reject.
Ip -> Any Internet Protocol
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
Icmp-> Internet Control Message Protocol
any any source address
IPADDR Destination address
MASK Destination address mask
[IFNAME] Egress interface name
Command Mode
IP extended access-list mode
No/clear
no (permit|deny) (ip|tcp|udp|icmp) any IPADDR MASK [IFNAME]
Show
Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples
ASUS(cong-ext-acl)#permit tcp any 10.0.0.1 0.0.0.0 [fa1/0/2]
13.35 (permit|deny) (tcp|udp) any [eq] [<0-65535>]
IPADDRMASK[eq][<0-65535>][IFNAME]
Syntax
(permit|deny) (tcp|udp) any [eq] [<0-65535>] IPADDR MASK [eq]
[<0-65535>] [IFNAME]
Parameters
permit-> Specify packets to forward
deny-> Specify packets to reject.
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
any any source address
eq Match only packets on a given port numbe
<0-65535> Port number
IPADDR Destination address
MASK Destination address mask