Owner manual

16
GigaX1104PS User's Manual
Figure 2.2 Login Screen
If you fail to connect to GigaX1104PS, you may need to check
whether an IP address in the 192.168.1.0 network, such as
192.168.1.2. is set on your PC.
3. Enter your username and password, and then click [OK] to enter
the Configuration Manager. The first time you log into this program,
use the defaults:
Default Username: admin
Default Password: admin
Note: You can change the password at any time (see section 3.1 Change
Login Password ).
The System Information page displays the information each time
you log into the Configuration Manager (shown in Figure 2.3).