Manual

53
Chapter 6 - Troubleshooting
ASUS GigaX 1024i+
6.3.4 Restore system congurations by FTP
Make sure your PC and the switch
are in the same VLAN before you
use ftp function as well as the
other remote management tools.
The switch VLAN is shown in the
System-->IP setup
page of the
WEB GUI or use “
net interface
show
” to display the VID by CLI.
1. Open the command prompt
window.
2. Change to the directory where
the system conguration le is located.
3. Use the command “
ftp <IP Address>
” to connect to the switch IP
address as the FTP server IP, ex: “
ftp 192.192.1.100
”.
4. Type the system’s user name.
5. Type the system’s password.
6. Use the command “
put <File Name>
” to restore the system
congurations. The le must be the backup le from the same switch
model, ex: “
put backup
”.
Figure 54. Restore system
congurations by FTP