Manual

35
Chapter 4 - Conguration Management
ASUS GigaX 1024i+
password again for conrmation.
•
D y n a m i c V L A N
: S p e c i f y t h e V L A N I D a s s i g n e d t o t h e
802.1x-authenticated clients.
Click <
Add
> to create the new user. Click <
Modify
> when want to make
some modifications. Click <
Remove
> when you want to remove the
selected user. Click <
OK
> to save the settings. Click <
Reload
> to refresh
the settings.
4.5.3 RADIUS
In order to use external RADIUS
server, the following parameters are
required to be setup:
•
Authentication Server IP
: The IP
address of the RADIUS server.
•
Authentication Server Port
: The
port number that the RADIUS server
is listening to.
•
Authentication Server Key
: The
key is used for communications between the GigaX and the RADIUS
server.
•
Conrm Authentication Key
: Re-type the key for conrmation.
Click <
OK
> to save the settings. Click <
Reload
> to refresh the settings. To
permanently save the conguration, go to the
Save Conguration
page,
The VLAN of the RADIUS server connected to the switch must be the
same VLAN of the system management interface.
then click <
Save
>.
4.5.4 Port Security
Port security pages include port configuration, port status, and secure
MAC addresses function.
4.5.4.1 Port Conguration
This page is used to congure various Port Security parameters. The total
number of available secure MAC addresses on the switch is 1024. Users
can congure the port in the following elds:
Figure 37. Radius