User Manual

ASUS STRIX B250F GAMING
21
IOAPIC 24-119 Entries [Enabled]
This item allows you to enable/disable the IOAPIC 24-119 Entries. IRQ24-119 may be used
by PCH devices. Disabling those interrupts may cause certain devices to fail. Conguration
options: [Enabled] [Disabled]
PCH Storage Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.
Hyper Kit Mode [Disabled]
Disable this option for M.2 devices. Enable this option for ASUS Hyper Kit card. Conguration
options: [Disabled] [Enabled]
SATA Controller(s) [Enabled]
This item allows you to enable or disable the SATA device. Conguration options: [Enabled]
[Disabled]
Aggressive LPM Support [Disabled]
This item allows you to enable or disable PCH entering link power state aggressively.
Conguration options: [Disabled] [Enabled]
SMART Self Test [On]
SMART (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that
shows a warning message during POST (Power-on Self Test) when an error occurs in the
hard disks. Conguration options: [On] [Off]
Hot Plug [Disabled] (SATA6G_1 (Gray) ~ SATA6G_6(Gray))
These items allow you to enable/disable SATA Hot Plug Support. Conguration options:
[Disabled] [Enabled]
PCH-FW Configuration
TPM Device Selection [Discrete TPM]
This item allows you to select the TPM device. Conguration options: [Discrete TPM]
[Firmware TPM]