User Manual

DVMT Pre-Allocated [32M]
Allows you to select the amount of system memory pre-allocated to DVMT 5.0 used by
the internal graphics device. Conguration options: [32M] [64M] [96M] [128M] [160M]
[192M] [224M] [256M] [288M] [320M] [352M] [384M] [416M] [448M] [480M] [512M]
[1024M]
DMI/OPI Conguration
This item allows you to control various DMI (direct media interface) to run at PCI-E 2.0 speed.
DMI Max Link Speed [Auto]
Allows you to congure the DMI speed. Conguration options: [Auto] [Gen1] [Gen2]
[Gen3]
PEG Port Conguration
Allows you to congure the PEG Port settings.
PCIEx16_1 Link Speed [Auto]
Allows you to congure the PCIEx16 speed for slot 1. Conguration options: [Auto]
[Gen1] [Gen2] [Gen3]
Memory Conguration
Allows you to congure the memory conguration parameters.
Memory Remap [Enabled]
Set this item to [Enabled] to support DRAM address remapping for 64-bit operating
systems. Conguration options: [Enabled] [Disabled]
2.6.4 PCH Conguration
This item allows you to congure the PCI Express conguration settings.
PCI Express Conguration
PCIe Speed [Auto]
Allows you to congure the PCIe speed. Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
2.6.5 PCH Storage Conguration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.
Hyper Kit Mode [Disabled]
Disables this option for M.2 devices. Enables this option for ASUS Hyper Kit card.
Conguration options: [Disabled] [Enabled]
SATA Controller(s) [Enabled]
Enables or disables onboard the SATA device. Conguration options: [Disabled] [Enabled]
The following items appear only when you set the SATA Controller(s) to [Enabled].
Aggressive LPM Support [Disabled]
This item is designed for LPM (link power management) support with a better energy saving
conditions. When disabled, the hot plug function of SATA ports are disabled. Conguration
options: [Disabled] [Enabled]
ASUS B150 PRO GAMING 2-27