User Manual

1-18
Chapter 1: Product introduction
2. M.2 socket 3
This socket allows you to install an M.2 (NGFF) SSD module.
• This socket supports M Key and 2242/2260/2280/22110 storage devices.
• When the M.2 Socket 3 is operating in SATA mode, SATA port 1 will be disabled.
• When using Intel
®
Desktop Responsiveness technologies with PCIe M.2 device,
ensure to set up the Windows
®
UEFI operating system under RAID mode.
The M.2 (NGFF) SSD module is purchased separately
B150 PRO GAMING M.2(SOCKET3)
M.2(SOCKET3)
3. USB 2.0 connectors (10-1 pin USB910, USB1112)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specications and supports up to
480Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
B150 PRO GAMING USB2.0 connectors
USB+5V USB_P11- USB_P11+ GND NC
USB+5V
USB_P12-
USB_P12+
GND
USB1112
PIN 1
PIN 1
USB+5V USB_P9- USB_P9+ GND NC
USB+5V
USB_P10-
USB_P10+
GND
USB910