User Guide

Disassembly Procedure
V1.0
2 - 8
Top Case Module
The illustrations below show how to remove and disassemble the Top Case Module of the notebook.
Remove the Top Case Module
1. Remove 2 screws (M2*4) on the bottom case. Then pry the hinge cover by a plastic blade and
remove the hinge cover.
2. Remove 17 screws (M2.5*5, M2*4) on the bottom case. Then remove 6 screws (M2.5*7) on the
LCD hinges and lay down the LCD module.
T O P C A S E
M2*4