Specifications

ManualsBrandsAsus ManualsMotherboardF2A85-M2

Motherboard

F2A85-M PRO

www.devicemanuals.eu

Summary of content (165 pages)

PAGE 1
ua ls an em ev ic .e u Motherboard .
PAGE 2
E7424 Second Edition July 2012 em an ua ls .e u Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
PAGE 3
Contents Safety information ..................................................................................................... vii About this guide ....................................................................................................... viii F2A85-M PRO speciications summary .................................................................... x Package contents .....................................................................................................
PAGE 4
BIOS setup EZ Mode...................................................................................... 3-3 3.2.2 Advanced Mode .......................................................................... 3-4 Main menu .................................................................................................. 3-6 Ai Tweaker menu ........................................................................................ 3-8 3.4.1 Ai Overclock Tuner [Auto] .............................................
PAGE 5
3.6.3 3.9 CPU_FAN Q-Fan Control [Disabled] ......................................... 3-21 CHA_FAN1/2/3 Q-Fan Control [Enabled].................................. 3-22 3.6.6 Anti Surge Support [Enabled].................................................... 3-22 Boot menu ................................................................................................ 3-23 3.7.1 Bootup NumLock State [On] ..................................................... 3-23 3.7.2 Full Screen Logo [Enabled] ..........
PAGE 6
4.3.10 Probe II...................................................................................... 4-23 4.3.11 Sensor Recorder ....................................................................... 4-24 4.3.12 ASUS Update ............................................................................ 4-26 4.3.13 MyLogo2 ................................................................................... 4-27 4.3.14 Audio conigurations.................................................................
PAGE 7
Safety information Electrical safety To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
PAGE 8
About this guide This user guide contains the information you need when installing and coniguring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. It includes description of the switches, jumpers, and connectors on the motherboard.
PAGE 9
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task IMPORTANT: Instructions that you MUST follow to complete a task. . .e u NOTE: Tips and additional information to help you complete a task.
PAGE 10
F2A85-M PRO speciications summary AMD® A-series accelerated processors with AMD® Radeon™ HD 7000 series graphics, up to 4 CPU cores, FM2 package APU AMD® Turbo Core Technology 3.0 support • The AMD® Turbo Core Technology 3.0 support depends on the APU types. • Refer to www.asus.com for the AMD® CPU support list Chipset AMD® A85X FCH (Hudson D4) Memory Dual-channel memory architecture 4 x 240-pin DIMM slots support maximum 64GB unbuffered non-ECC DDR3 2400(O.C.
PAGE 11
F2A85-M PRO speciications summary AMD® A85X FCH: USB - 10 x USB 2.0 ports (8 ports at the mid-board, 2 ports at the back panel) - 4 x USB 3.0 ports (2 ports at the mid-board, 2 ports at the back panel) Asmedia® PCIe USB3.0 controller: - 2 x USB 3.0 ports (blue, at the back panel) * Supports ASUS USB 3.
PAGE 12
F2A85-M PRO speciications summary Back Panel I/O ports 1 x PS/2 keyboard / mouse combo port 1 x DisplayPort 1 x HDMI output port 1 x DVI output port 1 x D-Sub output port 1 x Optical S/PDIF output port 1 x LAN (RJ-45) port 1 x eSATA port 2 x USB 2.0 ports 4 x USB 3.0/2.0 ports (blue, 1 port supports USB BIOS Flashback) 8-channel audio I/O ports ASUS exclusive overclocking features - TPU Switch - Auto Tuning Precision Tweaker 2 ua ls vCore: Adjustable CPU voltage at 0.
PAGE 13
F2A85-M PRO speciications summary BIOS 64Mb Flash ROM, UEFI BIOS, PnP, DMI 2.0, WfM 2.0, SM BIOS V2.7, ACPI 2.0a Accessories 2 x Serial ATA 6.0Gb/s cables 1 x Q-Shield 1 x User Manual 1 x Support DVD Support DVD Drivers ASUS Update ASUS utilities Anti-Virus software (OEM version) Form factor w w w .d ev ic em an ua ls Speciications are subject to change without notice. .e u uATX form factor: 9.6 in x 9.6 in (24.4 cm x 24.
PAGE 14
Package contents Check your motherboard package for the following items. al nu User Ma F2A85-M PRO User Guide ua ls .e u ASUS F2A85-M PRO motherboard 2 x Serial ATA 6.0 Gb/s cables 1 x ASUS Q-Shield em an Support DVD If any of the above items is damaged or missing, contact your retailer. • The illustrated items above are for reference only. Actual product speciications may vary with different models. w w w .
PAGE 15
Installation tools and components Philips (cross) screwdriver PC chassis Power supply unit ua ls .e u 1 bag of screws AMD FM2 compatible CPU Fan SATA hard disk drive w w .d DIMM ev ic em an AMD FM2 APU w SATA optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package.
PAGE 16
xvi .d w w w ua ls an em ev ic .
PAGE 17
1 Product introduction 1.1 Special features 1.1.1 Product highlights AMD® A-series accelerated processors with AMD® Radeon™ HD 7000 series graphics .e u This motherboard supports AMD® A- series accelerated processor with AMD® Radeon™ HD 7000 series graphics. This revolutionary APU (Accelerated Processing Unit) combines processing power and advanced DirectX 11 graphics in one small, energy-eficient design to enable accelerated performance and an industry-leading visual experience.
PAGE 18
1.1.2 Dual Intelligent Processors 2 – DIGI+ VRM Together with the ASUS pioneered twin onboard chips, TPU (TurboV Processing Unit) and EPU (Energy Processing Unit), ASUS Dual Intelligent Processors feature DIGI+VRM, which launches power delivery into a digital standard with a programmable microprocessor that perfectly serves power signal, eliminating digital-to-analog conversion lag.
PAGE 19
ASUS UEFI BIOS (EZ Mode) ASUS UEFI BIOS, a UEFI compliant architecture, offers the irst mouse-controlled intuitive graphical BIOS interface that goes beyond the traditional keyboard-only BIOS controls, providing you with more lexibility, convenience, and easy to navigate UEFI BIOS than the traditional BIOS versions. It offers you with dual selectable modes and native support for hard drives larger than 2.2 TB.
PAGE 20
ASUS Q-Design ASUS Q-Design enhances your DIY experience. All of Q-Slot and Q-Shield design speed up and simplify the DIY process. ASUS Q-Shield ASUS Q-Shield’s special design makes it convenient and easy to install on your motherboard. With better electric conductivity, it ideally protects your motherboard against static electricity and shields it against Electronic Magnetic Interference (EMI).
PAGE 21
1.2 Motherboard overview 1.2.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity. • Hold components by the edges to avoid touching the ICs on them.
PAGE 22
1.2.2 Motherboard layout 1 2 2 3 4 5 6 24.4cm(9.6in) EPU CHA_FAN1 KBMS_USB12 CPU_FAN SPDIFO _HDMI _DP EPU_LED EATX12V PCIEX1_2 em AMD® A85X ev ic Super I/O 64Mb BIOS .d PCIEX16_2 SPDIF_OUT w 23 22 2 w 24 TPM CLRTC FLBK_LED USB910 BIOS_FLBK USB78 USB56 w CHA_FAN2 COM1 AAFP 21 24.4cm(9.
PAGE 23
Layout contents Connectors/Jumpers/Slots/LED 1. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) Page 1-25 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 1-24 1-20 1-23 2-4 1-8 1-22 1-19 1-18 1-30 1-29 1-21 1-26 1-28 1-20 1-22 1-30 1-20 1-23 1-31 1-27 1-29 1-27 1-22 Chapter 1 w w w .d ev ic em an ua ls .
PAGE 24
1.2.3 System memory DIMM_B1 DIMM_B2 DIMM_A1 DIMM_A2 This motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for better performance with less power consumption. The igure illustrates the location of the DDR3 DIMM sockets: w w w .
PAGE 25
Memory conigurations You may install 1GB, 2GB, 4GB, and 8GB unbuffered non-ECC DDR3 DIMMs into the DIMM sockets. Memory module with memory frequency higher than 2133 MHz and its corresponding timing or the loaded XMP Proile is not the JEDEC memory standard. The stability and compatibility of these memory modules depend on the CPU’s capabilities and other installed devices. • You may install varying memory sizes in Channel A and Channel B.
PAGE 26
F2A85-M PRO Motherboard Qualiied Vendors Lists (QVL) DDR3 2400(O.C.) MHz capability Vendors Part No. Chip NO. Timing DIMM socket support Voltage (Optional) 1 DIMM 2 DIMMs 4 DIMMs 4GB (2x 2GB) DS - - 9-11-9-28 1.65V • • 2GB SS - - 10-11-10-30 1.8V • • 4GB 4GB DS SEC 128 HCH9 K4B2G0846D DS SEC 128 HCH9 K4B2G0846D 9-11-11-28 9-11-11-28 • • • • SS/ DS Chip Brand Size F3-19200CL9D4GBPIS(XMP) KINGMAX FLLE88F-C8KKAA HAIS(XMP) Team TXD34096M2400HC9N-L Team TXD34096M2400HC9N-L G.SKILL 1.
PAGE 27
DDR3 2000(O.C.) MHz capability Vendors Part No. Size SS/ Chip DS Brand Chip NO. Apacer CORSAIR CORSAIR G.SKILL G.SKILL G.SKILL GEIL KINGSTON KINGSTON KINGSTON KINGSTON KINGSTON 78.AAGD5.
PAGE 28
DDR3 1600 MHz capability Part No. Size SS/ DS Chip Brand Chip NO. Timing Voltage G.SKILL F3-12800CL7D-4GBRH(XMP) 4GB(2x2GB) SS - - 7-7-7-24 G.SKILL F3-12800CL7D-4GBECO(XMP) 4GB(2x2GB) DS - - 7-7-8-24 G.SKILL G.SKILL F3-12800CL7D-4GBRM(XMP) F3-12800CL8D-4GBRM(XMP) DS DS - - 7-8-7-24 8-8-8-24 G.SKILL F3-12800CL9D-4GBECO(XMP) 4GB(2x2GB) DS - - 9-9-9-24 G.SKILL F3-12800CL9D-4GBRL(XMP) 4GB(2x2GB) DS - - 9-9-9-24 G.
PAGE 29
DDR3 1333 MHz capability Part No. A-DATA AD31333001GOU 1GB SS A-Data A-DATA A-DATA A-DATA AD3U1333C2G9 AM2U139C2P1 AX3U1333C2G9-BP 2GB 2GB 2GB 3GB(3 x 1GB) SS SS SS A-DATA ADATA - A-DATA AD31333G001GOU A-DATA AXDU1333GC2G9-2G(XMP) A-DATA A-DATA A-DATA A-DATA Apacer Apacer Apacer Apacer AD31333G002GMU AD63I1C1624EV AM2U139C4P2 SU3U1333W8G9-B 78.A1GC6.9L1 78.A1GC6.9L1 AU02GFA33C9NBGC 78.B1GDE.
PAGE 30
DDR3 1333 MHz capability Vendors Part No. Size SS/ DS Chip Brand Chip NO. Timing Voltage KINGSTON KVR1333D3N9/2G KVR1333D3N9/2G-SP(Low proile) KVR1333D3N9/2G-SP(low proile) 2GB DS ELPIDA J1108BDSE-DJ-F 9 1.5V DIMM socket support (Optional) 2 4 1 DIMM DIMMs DIMMs • • • 2GB DS KTC D1288JEMFNGD9U - 1.5V • • • 2GB DS KINGSTON D1288JPSFPGD9U - 1.5V • • • DS - - 7 1.
PAGE 31
DDR3 1066 MHz capability Vendors Part No. Size SS/ Chip DS Brand Chip NO. Timing Voltage Crucial Crucial CT12864BA1067.8FF CT25664BA1067.16FF 1GB 2GB SS Micron DS Micron 9GF22D9KPT 9HF22D9KPT 7 7 ELPIDA EBJ10UE8EDF0-AE-F 1GB SS ELPIDA EBJ21UE8EDF0-AE-F 2GB DS ELPIDA J1108EDSE-DJ-F - ELPIDA J1108EDSE-DJ-F - KINGSTON KVR1066D3N7/1G(Low proile) 1GB KINGSTON KVR1066D3N7/2G 2GB KINGSTON KVR1066D3N7/4G 4GB SS ELPIDA J1108BFSE-DJ-F 7 DS ELPIDA J1108BDSE-DJ-F 7 DS Hynix H5TQ2G83AFR 7 1.
PAGE 32
1.2.4 Expansion slots ua ls .e u Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. an F2A85-M PRO em 64Mb BIOS Slot Description PCIe 2.0 x16_1 slot (Single @x16 or dual@x8x8 mode) 2 PCIe 2.0 x1_1 slot 3 PCIe 2.0 x1_2 slot 4 PCIe 2.0 x16_2 slot (Single @x16 or dual@x8x8 mode) w w w 1 VGA coniguration Chapter 1 1-16 TPU .d Slot No. ev ic SB_PWR PCI Express operating mode PCIe 2.
PAGE 33
• In single VGA card mode, use the PCIe 2.0 x16_1 slot (navy blue) for a PCI Express x16 graphics card to get better performance. • We recommend that you provide suficient power when running CrossFireX™ mode. • Connect a chassis fan to the motherboard connector labeled CHA_FAN1/2/3 when using multiple graphics cards for better thermal environment. IRQ assignments for this motherboard F - G - H - - - - - ua ls an em ev ic .d shared - - - Chapter 1 w w w HD Audio E - .
PAGE 34
1.2.5 Onboard switches and buttons Onboard switches and buttons allow you to ine-tune performance when working on a bare or open-case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance. 1. DirectKey button This feature allows your system to go to the BIOS Setup program with the press of a button. With DirectKey, you can enter the BIOS anytime without having to press the key during POST.
PAGE 35
2. MemOK! switch Installing DIMMs that are incompatible with the motherboard may cause system boot failure, and the DRAM_LED near the MemOK! switch lights continuously. Press and hold the MemOK! switch until the DRAM_LED starts blinking to begin automatic memory compatibility tuning for successful boot. F2A85-M PRO .e u F2A85-M PRO MemOK! switch Refer to section 1.2.7 Onboard LEDs for the exact location of the DRAM_LED. • The DRAM_LED also lights when the DIMM is not properly installed.
PAGE 36
3. TPU switch This switch allows you to enable or disable the TPU function. TPU F2A85-M PRO F2A85-M PRO TPU switch 4. EPU switch .e u This switch allows you to enable or disable the EPU function. F2A85-M PRO 5. ev ic F2A85-M PRO EPU switch em an ua ls EPU BIOS Flashback button w w w .d USB BIOS Flashback allows you to easily update the BIOS without entering the BIOS or operating system.
PAGE 37
1.2.6 Jumpers Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. CLRTC 1 F2A85-M PRO 2 2 3 Normal (Default) Clear RTC .
PAGE 38
1.2.7 1. Onboard LEDs Standby Power LED The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED. SB_PWR F2A85-M PRO ON Standby Power OFF Powered Off DRAM LED ua ls 2. .
PAGE 39
4. EPU LED The EPU LED lights when the EPU switch is turned to Enable. EPU_LED F2A85-M PRO F2A85-M PRO EPU Boost LED 5. BIOS Flashback LED (FLBK_LED) an ua ls .e u The FLBK LED lights when the USB Flashback button is pressed for three seconds. F2A85-M PRO Chapter 1 w w w .
PAGE 40
1.2.8 1. Internal connectors CPU and chassis fan connectors (4-pin CPU_FAN, and 4-pin CHA_FAN1/2/3) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CPU_FAN CPU FAN PWM CPU FAN IN CPU FAN PWR GND CHA FAN PWM CHA FAN IN CHA FAN PWR GND CHA_FAN1 CHA_FAN3 .
PAGE 41
2. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) These connectors are for an ATX power supply. The plugs from the power supply are designed to it these connectors in only one orientation. Find the proper orientation and push down irmly until the connectors completely it.
PAGE 42
3. Serial ATA 6.0 Gb/s connectors (7-pin SATA6G 1~7) These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 5, RAID 10, or JBOD coniguration through the onboard controller. SATA6G_7 GND RSATA_TXP7 RSATA_TXN7 GND RSATA_RXN7 RSATA_RXP7 GND GND RSATA_RXP6 RSATA_RXN6 GND RSATA_TXN6 RSATA_TXP6 GND .
PAGE 43
4. Serial port connector (10-1 pin COM1) This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. PIN 1 DCD TXD GND RTS RI RXD DTR DSR CTS COM1 ua ls F2A85-M PRO Serial port (COM1) connector .e u F2A85-M PRO Digital audio connector (4-1 pin SPDIF_OUT) em 5. an The COM module is purchased separately. SPDIFOUT GND +5V w w .
PAGE 44
6. System panel connector (20-8 pin PANEL) This connector supports several chassis-mounted functions. +5V Ground Ground Speaker SPEAKER PLED- PLED+ PLED PANEL F2A85-M PRO IDE_LED PWRSW Reset Ground IDE_LED+ IDE_LED- PWR Ground PIN 1 RESET * Requires an ATX power supply System power LED (2-pin PLED) ua ls • .e u F2A85-M PRO System panel connector Hard disk drive activity LED (2-pin IDE_LED) em • an This 2-pin connector is for the system power LED.
PAGE 45
7. Front panel audio connector (10-1 pin AAFP) NC AGND NC NC SENSE2_RETUR AGND NC SENSE1_RETUR This connector is for a chassis-mounted front panel audio I/O module that supports either High Deinition Audio or AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.
PAGE 46
9. USB 2.0 connectors (10-1 pin USB34, USB56, USB78, USB910) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 speciication that supports up to 480Mbps connection speed. USB+5V USB_P4USB_P4+ GND NC USB+5V USB_P3USB_P3+ GND .e u PIN 1 ua ls PIN 1 USB+5V USB_P5USB_P5+ GND USB+5V USB_P8USB_P8+ GND NC USB34 an F2A85-M PRO USB2.
PAGE 47
11. TPM connector (20-1 pin TPM) This connector supports a Trusted Platform Module (TPM) system, which securely store keys, digital certiicates, passwords and data. A TPM system also helps enhance network security, protect digital identities, and ensures platform integrity. F2A85-M PRO .e u F2A85-M PRO TPM connector Chapter 1 w w w .d ev ic em an ua ls TPM module is purchased separately.
PAGE 48
.e u ua ls an em ev ic .
PAGE 49
2 Basic Installation 2.1 Building your PC system 2.1.1 Motherboard installation The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps are the same for all models. Install the ASUS Q-Shield to the chassis rear I/O panel. .e u 1. Chapter 2 w w w .
PAGE 50
Place the motherboard into the chassis, ensuring that its rear I/O ports are aligned to the chassis’ rear I/O panel. w w w .d ev ic em an ua ls .e u 2.
PAGE 51
Place nine screws into the holes indicated by circles to secure the motherboard to the chassis. w w w .d ev ic em an ua ls .e u 3. Chapter 2 F2A85-M PRO DO NOT overtighten the screws! Doing so can damage the motherboard.
PAGE 52
2.1.2 APU installation The AMD FM2 socket is compatible with AMD A-series accelerated processors. Ensure that you use a CPU designed for the FM2 socket. The CPU its in only one correct orientation. DO NOT force the APU into the socket to prevent bending the connectors on the socket and damaging the APU! ev ic em an ua ls .e u 1 w w w .
PAGE 53
an CPU heatsink and fan assembly installation w w w .d ev ic em 2.1.3 ua ls .e u 3 ASUS F2A85-M PRO Chapter 2 Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.
PAGE 54
To install the CPU heatsink and fan assembly w w 2 w .d ev ic em an ua ls .
PAGE 55
Chapter 2 .d w w w 4 ua ls an em ev ic .
PAGE 56
2.1.4 DIMM installation 1 ev ic em an ua ls .e u 2 w w w .
PAGE 57
2.1.5 ATX Power connection ua ls .e u 1 ev ic em an 2 OR Chapter 2 w w w .
PAGE 58
2.1.6 SATA device connection 1 OR ev ic em an ua ls .e u 2 w w w .
PAGE 59
2.1.7 Expansion Card installation Chapter 2 w w w .d ev ic To install PCIe x1 cards em an ua ls .
PAGE 60
2.2 BIOS update utility 2.2.1 USB BIOS Flashback USB BIOS Flashback allows you to easily update the BIOS without entering the existing BIOS or operating system. Simply insert a USB storage device to the USB port, press the USB BIOS Flashback button for three seconds, and the BIOS is updated automatically. BIOS_FLBK F2A85-M PRO F2A85-M PRO BIOS FLBK button .e u To use USB BIOS Flashback: Place the bundled support DVD to the optical drive and install the USB BIOS Flashback Wizard.
PAGE 61
Motherboard rear and audio connections 2.3.1 Rear I/O connection .d ev ic em an ua ls .e u 2.3 7. AMD USB 3.0 ports 1 and 2 support ASUS USB 3.0 Boost UASP Mode. Bottom part supports USB BIOS Flashback and USB Charger+ 2. Optical S/PDIF Out port 8. DVI-D port 3. eSATA port 9. VGA port 4. LAN (RJ-45) port* 10. DisplayPort 5. Audio I/O ports** 11. HDMI port 6. ASMedia USB 3.0 ports 3 and 4 support ASUS USB 3.0 Boost UASP Mode 12. USB 2.
PAGE 62
• DO NOT insert a different connector to the external SATA port. • Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows® OS environment and after the USB 3.0 driver installation. • USB 3.0 devices can only be used as data storage only. • We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster and better performance for your USB 3.0 devices. • USB3.0_2 port supports USB Charger+ and USB BIOS Flashback.
PAGE 63
2.3.2 Audio I/O connections Audio I/O ports an ua ls .e u Connect to Headphone and Mic w w w .d ev ic em Connect to Stereo Speakers Chapter 2 Connect to 2.
PAGE 64
Connect to 4.1 channel Speakers w w .d ev ic em an ua ls .e u Connect to 5.1 channel Speakers w Connect to 7.
PAGE 65
2.4 Starting up for the irst time 1. After making all the connections, replace the system case cover. 2. Ensure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis. 4. Connect the power cord to a power outlet that is equipped with a surge protector. 5. Turn on the devices in the following order: Monitor b. External SCSI devices (starting with the last device on the chain) c.
PAGE 66
.e u ua ls an em ev ic .
PAGE 67
3 BIOS setup 3.1 Knowing BIOS The new ASUS UEFI BIOS is a Uniied Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboardonly BIOS controls to enable a more lexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system. The term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise speciied. ua ls .
PAGE 68
3.2 BIOS setup program Use the BIOS Setup to update the BIOS or conigure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program. Entering BIOS at startup To enter BIOS Setup at startup: • Press during the Power-On Self Test (POST). If you do not press , POST continues with its routines. Entering BIOS Setup after POST To enter BIOS Setup after POST: Press ++ simultaneously.
PAGE 69
3.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority. To access the Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode or press hot key for the advanced BIOS settings. The default screen for entering the BIOS setup program can be changed. Refer to the Setup Mode item in section 3.
PAGE 70
3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to conigure the BIOS settings. The igure below shows an example of the Advanced Mode. Refer to the following sections for the detailed conigurations. To access the Advanced Mode, click Exit, then select Advanced Mode or press F7 hotkey. Menu bar Coniguration ields General help w w w .d ev ic em an ua ls .
PAGE 71
Menu items The highlighted item on the menu bar displays the speciic items for that menu. For example, selecting Main shows the Main menu items. The other items (Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items. Back button This button appears when entering a submenu. Press or use the USB mouse to click this button to return to the previous menu screen.
PAGE 72
3.3 Main menu an ua ls .e u The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. em Security w w w .d ev ic The Security menu items allow you to change the system security settings. Chapter 3 3-6 • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password.
PAGE 73
Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected ields in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password item and press . 2. From the Create New Password box, key in a password, then press . 3. Conirm the password when prompted.
PAGE 74
To change a user password: 1. Select the User Password item and press . 2. From the Enter Current Password box, key in the current password, then press . 3. From the Create New Password box, key in a new password, then press . 4. Conirm the password when prompted. To clear the user password, follow the same steps as in changing a user password, but press when prompted to create/conirm the password.
PAGE 75
Target CPU Speed : xxxxMHz Displays the current CPU speed. Target DRAM Speed : xxxxMHz Displays the current DRAM speed. 3.4.1 Ai Overclock Tuner [Auto] Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Select any of these preset overclocking coniguration options: [Auto] Loads the optimal settings for the system. [Manual] Allows you to individually set overclocking parameters.
PAGE 76
3.4.6 GPU Boost Allows you to conigure the GPU Boost settings. [Auto] GPU is set to its optimized settings. [Turbo] Select to achieve better 3D performance. [Extreme] Select to get an excellent visual performance. [Manual] Select to manually set your preferred value. 3.4.7 OC Tuner OC Tuner automatically overclocks the frequency and voltage of CPU and DRAM for enhancing the system performance. Press and select OK to start automatic overclocking. 3.4.8 DRAM Timing Control ua ls .
PAGE 77
CPU Power Phase Control [Standard] Phase number is the number of working VRM phase. Increasing phase number under heavy system loading to get more transient and better thermal performance. Reducing phase number under light system loading to increase VRM eficiency. [Standard] Proceeds phase control depending on the CPU loading. [Optimized] Loads the ASUS optimized phase tuning proile. [Extreme] Proceeds the full phase mode. [Manual Adjustment] Allows manual adjustment.
PAGE 78
VDDNB Offset Mode Sign [+] This item appears only when you set the CPU Voltage item to [Offset Mode]. [+] To offset the voltage by a positive value. [–] To offset the voltage by a negative value. VDDNB Offset Voltage [Auto] Allows you to set the VDDNB Offset voltage. The values range from 0.00625V to 0.500V with a 0.00625V interval. CPU Manual Voltage [Auto] This item appears only when you set the CPU Voltage item to [Manual Mode] and allows you to manually set the CPU voltage. The values range from 0.
PAGE 79
3.4.18 DRAM VREFDQ Voltage [Auto] Allows you to set the DRAM VREFDQ voltage. The values range from 0.435V to 1.065V with a 0.005V interval. The values of the CPU Offset Voltage, CPU Manual Voltage, VDDNB Offset Voltage, VDDNB Manual Voltage, DRAM Voltage, SB 1.1V Voltage, 1.1Vsb Voltage, APU1.2V Voltage, VDDA Voltage, NB VREF Voltage, DRAM VREFCA Voltage, and DRAM VREFDQ Voltage items are labeled in different color, indicating the risk levels of high voltage settings.
PAGE 80
3.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. CPU Coniguration w 3.5.1 w .d ev ic em an ua ls .e u Be cautious when changing the settings of the Advanced menu items. Incorrect ield values can cause the system to malfunction. w The items in this menu show the CPU-related information that the BIOS automatically detects. The items shown in submenu may be different due to the CPU you installed.
PAGE 81
SVM [Enabled] Enables or disables CPU virtualization. Coniguration options: [Disabled] [Enabled] CPB Mode [Auto] Allows you to disable CPB mode function. Coniguration options: [Auto] [Disabled] C6 Mode [Enabled] Enables or disables C6 mode function. Coniguration options: [Disabled] [Enabled] IOMMU [Disabled] Enables or disables IOMMU support. Coniguration options: [Disabled] [Enabled] 3.5.2 SATA Coniguration .e u While entering Setup, the BIOS automatically detects the presence of SATA devices.
PAGE 82
OnChip SATA MAX Speed [SATA 6.0Gb/s] Sets the maximum onboard SATA port speed. Coniguration options: [SATA 6.0Gb/s] [SATA 3.0Gb/s] S.M.A.R.T. Status Check [Enabled] S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When read/write of your hard disk errors occur, this feature allows the hard disk to report warning messages during the POST. Coniguration options: [Enabled] [Disabled] 3.5.
PAGE 83
Integrated Graphics [Auto] Enables the integrated graphics controller. Coniguration options: [Auto] [Force] UMA Frame Buffer Size [Auto] This item appears only when you set the previous item to [Force]. Coniguration options: [Auto] [32M] [64M] [128M] [256M] [512M] [1G] [2G] HDMI/DVI Port Output [Auto] Sets the HDMI/DVI port output type. Coniguration options: [Auto] [HDMI] [DVI] PCIEX16_1 [Auto] 3.5.5 Onboard Devices Coniguration HD Audio Device [Enabled] .
PAGE 84
Asmedia USB 3.0 Battery Charging Support [Enabled] This item appears only when the Asmedia USB 3.0 Controller item is set to [Enabled]. [Enabled] Enables the Asmedia USB 3.0 battery charging function. [Disabled] Disables this function Serial Port Coniguration The sub-items in this menu allow you to set the serial port coniguration. Serial Port [Enabled] Allows you to enable or disable the serial port (COM). Coniguration options: [Enabled] [Disabled] Change Settings [IO=3F8h; IRQ=4] 3.5.6 ua ls .
PAGE 85
Power On By RTC [Disabled] [Disabled] Disables RTC to generate a wake event. [Enabled] When set to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/ Second will become user-conigurable with set values. 3.5.7 Network Stack Network Stack [Disabled] This item allows user to disable or enable the UEFI network stack. Coniguration options: [Disabled] [Enabled] Ipv4 PXE Support [Enabled] This item appears only when you set the Network Stack item to [Enabled].
PAGE 86
3.6 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. CPU Temperature / MB Temperature [xxxºC/xxxºF] .d 3.6.1 ev ic em an ua ls .e u Scroll down to display the other BIOS items. CPU_FAN Speed [xxxx RPM] or [Ignore] / [N/A] w 3.6.2 w w The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select Ignore if you do not wish to display the detected temperatures.
PAGE 87
3.6.4 CPU_FAN Q-Fan Control [Disabled] [Disabled] Disables the CPU Q-Fan control feature. [Enabled] Enables the CPU Q-Fan control feature. CPU_FAN Speed Low Limit [200 RPM] This item appears only when you enable the CPU_FAN Q-Fan Control feature and allows you to disable or set the CPU fan warning speed.
PAGE 88
3.6.5 CHA_FAN1/2/3 Q-Fan Control [Enabled] [Disabled] Disables the Chassis Q-Fan control feature. [Enabled] Enables the Chassis Q-Fan control feature. CHA_FAN1/2/3 Fan Speed Low Limit [600 RPM] This item appears only when you enable the CHA_FAN1/2/3 Q-Fan Control feature and allows you to disable or set the CHA_FAN1/2/3/4 fan warning speed.
PAGE 89
3.7 Boot menu The Boot menu items allow you to change the system boot options. EFI BIOS Utility - Advanced Mode Ai Tweaker Main Exit Advanced Monitor Bootup NumLock State Boot On Full Screen Logo Tool Select the keyboard NumLock state Enabled Fast Boot Enabled USB Support Partial In... PS2 Devices Support Enabled Network Stack Driver Support Disabled Post Logo Delay Time 3 sec Wait for ‘F1’ If Error Enabled Go to BIOS...
PAGE 90
USB Support [Partial In...] [Disabled] All the USB devices will be available only afater entering the operating system (OS). [Full Initial] All the USB devices will be available during POST and in OS. [Partial Initial] Speciic USB device / port will be available before entering OS. PS2 Devices Support [Enabled] This item allows you to set the PS/2 devices support. Coniguration options: [Auto] [Enabled].
PAGE 91
Launch PXE OpROM policy [DO NOT launch] Coniguration option: [DO not launch] [Legacy irst] [UEFI irst] Launch Storage OpROM policy [Legacy only] Coniguration option: [DO not launch] [Both, Legacy irst] [Both, UEFI irst] [Legacy irst] [UEFI irst] Other device ROM priority [Legacy first] Coniguration option: [UEFI irst] [Legacy irst] 3.7.10 Security Boot parameters This option allows you to conigure the Security Boot parameters. OS Type [Other Lega...
PAGE 92
Delete the KEK Coniguration options: [Yes] [No] Append an entry to KEK Coniguration options: [OK] Set DB from File Coniguration options: [OK] Get DB to File Coniguration options: [OK] Delete the DB Coniguration options: [Yes] [No] Append an entry to DB Coniguration options: [OK] Set DBX from File Coniguration options: [OK] 3.7.11 an Append an entry to DBX Coniguration options: [OK] ua ls Delete the DBX Coniguration options: [Yes] [No] .
PAGE 93
3.8 Tools menu The Tools menu items allow you to conigure options for special functions. Select an item then press to display the submenu. 3.8.1 ASUS EZ Flash 2 Utility ASUS SPD Information an 3.8.2 ua ls For more details, see section 2.1.2 ASUS EZ Flash 2. .e u Allows you to run ASUS EZ Flash 2. Press [Enter] to launch the ASUS EZ Flash 2 screen. DIMM Slot # [DIMM_A1] ASUS O.C. Proile ev ic 3.8.
PAGE 94
3.9 Exit menu ua ls .e u The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Load Optimized Defaults em an This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press , a conirmation window appears. Select Yes to load the default values. Save Changes & Reset .
PAGE 95
Software support • This motherboard supports Windows® XP/ Vista / 64-bit Vista / 7 / 8 / 64-bit 7 / 8 operating systems (OS). • Motherboard settings and hardware options vary. Use the setup procedures presented in this chapter for reference only. Refer to your OS documentation for detailed information. • Ensure that you install the Windows® XP Service Pack 3 or later versions before installing the drivers for better compatibility and system stability. Support DVD information ua ls 4.
PAGE 96
4.2.2 Obtaining the software manuals The software manuals are included in the support DVD. Follow the instructions below to get the necessary software manuals. The software manual iles are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening the iles. Click the Manual tab. Click ASUS Motherboard Utility Guide from the manual list on the left. 2. The Manual folder of the support DVD appears. Double-click the folder of your selected software. 3.
PAGE 97
4.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme ile that came with the software application for more information. 4.3.1 AI Suite II AI Suite II is an all-in-one interface that integrates several ASUS utilities and allows users to launch and operate these utilities simultaneously.
PAGE 98
4.3.2 TurboV EVO ASUS TurboV EVO introduces TurboV that allows you to manually adjust the APU frequency and related voltages as well as Auto Tuning function that offers automatic and easy overlocking and system level up. After installing AI Suite II from the motherboard support DVD, launch TurboV EVO by clicking Tool > TurboV EVO on the AI Suite II main menu bar . Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software coniguration.
PAGE 99
Using Advanced Mode Click on the Advanced Mode tab to adjust the advanced voltage settings. Advanced mode Voltage Adjustment bars Target values Current values Undoes all changes without applying Applies all changes immediately ua ls .e u Click to restore all start-up settings GPU Boost an GPU Boost overclocks the integrated iGPU for the best graphics performance. Click on the GPU Boost tab. 2. Adjust the GPU Boost settings. 3. Click Yes for the changes to take effect. w GPU Boost w w .
PAGE 100
APU Multiplier Allows you to manually adjust the APU Multiplier. 1. Click on the APU Multiplier tab. 2. Drag the adjustment bar leftwards or rightwards to the desired value. 3. Click Apply for the changes to take effect. .e u APU Multiplier ua ls Adjustment bar Undoes all changes without applying Applies all changes immediately em an Click to restore all start-up settings Set the APU Multiplier item in BIOS to [Auto] before using the APU Multiplier function in TurboV.
PAGE 101
Auto Tuning ASUS TurboV EVO includes two auto tuning modes, providing the most lexible auto-tuning options. • The overclocking result varies with the CPU model and the system coniguration. • To prevent overheating from damaging the motherboard, a better thermal environment is strongly recommended. • Fast Tuning: fast CPU overclocking • Extreme Tuning: extreme overclocking for CPU and memory Click the Auto Tuning tab and then click Fast. 2.
PAGE 102
If you did not click Stop in the previous step, TurboV automatically starts further system overclocking and stability test. An animation appears indicating the overclocking process. Click Stop if you want to cancel the Overclocking process. 5. TurboV automatically adjusts and saves BIOS settings and restarts the system. After re-entering Windows, a message appears indicating auto tuning success. Click OK to exit. .e u 4. ua ls TurboV automatically overclocks the CPU and memory and restarts the system.
PAGE 103
4.3.3 DIGI+ VRM ASUS DIGI+ VRM allows you to adjust VRM voltage and frequency modulation to enhance reliability and stability. It also provides the highest power eficiency, generating less heat to longer component lifespan and minimize power loss. To launch DIGI+VRM, click Tool > DIGI+ VRM on the AI Suite II main menu bar. CPU Power 5 4 Application aids 1 2 .
PAGE 104
Items Function description CPU Power Phase Control 6 Increase phase number under heavy system loading to get more transient and better thermal performance. Reduce phase number under light system loading to increase VRM eficiency. • The actual performance boost may vary depending on your CPU speciication. • Do not remove the thermal module. The thermal conditions should be monitored. w w w .d ev ic em an ua ls .
PAGE 105
4.3.4 EPU EPU is an energy-processing utility that provides several power-saving modes. When set to the Auto Mode, the system automatically changes its power-saving mode based on the current system condition. You can also conigure the system settings such as CPU frequency, GPU frequency, vCore Voltage, and Fan Control to customize a power-saving mode. Launching EPU To launch EPU, click Tool > EPU on the AI Suite II main menu bar. Displays the following message if no VGA power saving engine is detected.
PAGE 106
4.3.5 FAN Xpert 2 FAN Xpert 2 automatically detects and tweaks all fan speeds, and provides you with optimized fan settings based on the fans’ speciications and positions. Launching FAN Xpert 2 To launch FAN Xpert 2, click Tool > FAN Xpert 2 from the AI Suite menu bar. Using FAN Xpert 2 Auto Tuning FAN Xpert 2’s Fan Auto Tuning feature automatically detects the fans and their locations to provide you with optimized fan settings. To use Fan Auto Tuning: Click Fan Auto Tuning on the FAN Xpert 2 main menu.
PAGE 107
From the Fan Position screen, check and assign the locations of your fans, then click OK to exit the screen. ua ls .e u 3. em Select any of these fan customized settings for each fan: Silent: Minimized fan speed for silent fan operation. • Standard: Balanced coniguration between noise level and fan speed. • Turbo: High fan speed for high cooling capability. • Full Speed: Maximum fan speed. w .d ev ic • Chapter 4 w w 4.
PAGE 108
Advanced Mode FAN Xpert 2’s Advanced Mode button allows you to adjust the reaction speed for fan rotation based on the system’s temperature and to conigure the fan’s rotation per minute. em an ua ls .e u Click to switch window to Advanced Mode Smart Mode ev ic The Smart Mode allows you to adjust the reaction speed for fan rotation based on the system’s temperature. w w w .
PAGE 109
RPM Fixed Mode ua ls .e u The RPM Fixed Mode tab allows you to set your fan speed when CPU temperature is below 75 degrees. Click to switch between CPU fan window and chassis fan windows 1 to 4 em an Click and drag to make the adjustments To protect your CPU, the fan will not automatically turn off even if you set the CPU fan power to 0. • Only 4-pin CPU fans and 4-pin and 3-pin chassis fans are compatible with FAN Xpert 2.
PAGE 110
Fan Information Click the Fan Information button or the graph button to see the results. em an ua ls .e u either the table button to see the details of each detected fan. You can click on w w w .
PAGE 111
4.3.6 USB Charger+ This utility allows you to fast-charge your portable USB devices even if your PC is off, in Sleep Mode, or Hibernate Mode. Launching the USB Charger+ To launch this utility, open the AI Suite II, then click Tool > USB Charger+. Displays the status of the connected device* .
PAGE 112
Setting up the charging function When a portable device is connected to the USB port of the PC, the USB Charger+ automatically detects the kind of your device. Charging the device Click to fast-charge your device. Indicates that the portable device is in charging mode Click to rescan the connected device. em an ua ls .e u Click to fast-charge your connected device. .d ev ic Clicking the stops the charging of your connected device, and rescans for other detected devices.
PAGE 113
4.3.7 USB 3.0 Boost ASUS USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) and automatically increases a USB 3.0 device’s transfer speed up to 170%. Launching USB 3.0 Boost To launch USB 3.0 Boost, click Tool > USB 3.0 Boost on the AI Suite II main menu bar. Coniguring USB 3.0 Boost 1. Connect a USB 3.0 device to the USB 3.0 port. USB 3.0 Boost automatically detects the property of the USB 3.0 device and switches to Turbo mode or UASP mode (if UASP is supported by the USB 3.0 device).
PAGE 114
4.3.8 USB BIOS Flashback Wizard USB BIOS Flashback allows you to easily update the BIOS without entering the BIOS or operating system. Just connect the USB storage device containing the BIOS ile to the USB port, press the BIOS Flashback button, and the BIOS is updated automatically. Current BIOS information Sets the schedule for BIOS Update download .
PAGE 115
Downloading the updated BIOS 1. Click Check for New BIOS Update to check for the latest BIOS version. 3. After the download is complete, click OK. ua ls After the utility detects a new BIOS irmware, click from the Save to ield to save the BIOS irmware, select the USB lashdrive, and click Download. Chapter 4 w w w .d ev ic em an 2. .e u Wait for the system to check the latest BIOS irmware.
PAGE 116
4.3.9 Ai Charger+ This utility allows you to fast-charge your portable BC 1.1* mobile devices on your computer’s USB port three times faster than the standard USB devices**. * Check your manufacturer if your USB device is a Battery Charging Speciication 1.1 (BC 1.1) compliant or compatible device. • ** Actual charging speeds may vary depending on the charging rate and speciications of your USB device.
PAGE 117
4.3.10 Probe II Probe II is a utility that monitors the computer’s vital components, and detects and alerts you of any problem with these components. Probe II senses fan rotations, CPU temperature, and system voltages, among others. With this utility, you are assured that your computer is always at a healthy operating condition. Launching Probe II To launch Probe II, click Tool > Probe II on the AI Suite II main menu bar.
PAGE 118
4.3.11 Sensor Recorder Sensor Recorder monitors the changes in the system voltage, temperature, and fan speed on a timeline. The History Record function allows you to designate speciic time spans on record to keep track of the three system statuses for certain purposes. Launching Sensor Recorder To launch Sensor Recorder, click Tool > Sensor Recorder on the AI Suite II main menu bar. Using Sensor Recorder w w w .d ev ic em an ua ls .
PAGE 119
Using History Record Click the History Record tab and adjust the settings on the left for Record Interval and Record Duration. 2. Click Start Recording to start measuring and recording each sensor. 3. To stop recording, click Recording again. 4. To track the recorded contents, set Type/ Date/ Select display items to display the history details. ev ic em an ua ls .e u 1. Chapter 4 w w w .
PAGE 120
4.3.12 ASUS Update ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows® environment. Launching ASUS Update To launch ASUS Update, click Update > ASUS Update on the AI Suite II main menu bar. an ua ls .e u Using ASUS Update • Update BIOS from Internet em Select any of these options to update the BIOS: Download BIOS from Internet .d • ev ic Allows you to download the latest BIOS version from the ASUS website at www.asus.
PAGE 121
4.3.13 MyLogo2 MyLogo2 allows you to customize the boot logo, which is the image that appears on the screen during the Power On Self Tests (POST). Launching ASUS Update To launch MyLogo2, click Update > MyLogo on the AI Suite II main menu bar. em an ua ls .e u Using MyLogo ev ic Select the option that you want to use to update your boot logo, click Next and follow the instructions below. .
PAGE 122
3. Do any of the following: • Click Auto Tune to adjust the image size or the image resolution. • Click Booting Preview to preview the boot image. Click Next. 5. Click Flash to update the boot logo. 6. When prompted, click Yes to reboot the system. You will see the new boot logo the next time you start up the system. ev ic em an ua ls .e u 4. Audio conigurations w 4.3.14 w .d Ensure to enable the Full Screen Logo in BIOS to use this feature.
PAGE 123
A. Realtek HD Audio Manager for Windows® 7 Coniguration option tabs (vary with the audio devices connected) Device advanced settings Information button Exit button Minimize button Control settings Set default device buttons Realtek HD Audio Manager for Windows® XP em an B. ua ls Analog and digital connector status .e u Connector settings Exit button Minimize button ev ic Coniguration options w w w .
PAGE 124
4.3.15 Network iControl ASUS Network iControl, a one-stop setup network control center that gives you the EZ Start, Quick Connection, and EZ Proile functions, makes it easier for you to manage your network bandwidth. It also allows you to automatically connect to a PPPoE network for a more convenient online experience. To launch Network iControl, click Tool > Network iControl from AI Suite II main menu bar. • Ensure to install the LAN drivers before using this function.
PAGE 125
Using Quick Connection Coniguring the PPPoE connection settings Before enabling the Network iControl’s Quick Connection functions, you must conigure the PPPoE connection settings To conigure the PPPoE settings: in the taskbar, and select Open Network and Sharing Center. Right-click 2. Right-click the PPPoE Connection, and select Properties. 3. Click the Options tab, and deselect Prompt for name and password, certiicate, etc. Click OK to complete the auto PPPoE connection settings.
PAGE 126
Coniguring the Quick Connection To conigure the auto-PPPoE connection: 1. Click the Quick Connection tab. 2. Tick Automatically connect online anytime option, then select the connection name in the Connection Name dropdown box. 3. Click Apply to enable PPPoE automatic network connection. You can also enable the No Delay TCP function to help improve the network performance. Tick to set the auto PPPoE connection Click to apply settings Click ON to improve network performance w w w .
PAGE 127
Using EZ Proile To use the EZ Proile: EZ Proile allows you to load, edit, and save your own network program priority proile. 1. Click the EZ Proile tab. The running programs are shown in the network program column. 2. Select the network program, and click 3. Click to save the changes and/or rename your proile. 4. Click , to set the program priority as High, Normal, or Low. Click to save, or rename your proile settings ua ls Click to select a network proile .e u , or to create your proile.
PAGE 128
4.3.16 Remote GO! Connect your computer to a wireless network and use Remote GO! to wirelessly stream media iles to DLNA devices. It allows you to remotely control and access your computer using your mobile device, and easily transfer iles between your computer and mobile device. • Remote GO! is supported only on Windows® 7 / 8. • All devices using the Remote GO! functions must be in the same network. Using Remote GO! To launch Remote GO!, click Tool > Remote GO! on the AI Suite II menu bar. ua ls .
PAGE 129
W-Fi GO! Remote Install the W-Fi GO! Remote application on your mobile device to use Remote GO!’s remote control functions. • Wi-Fi GO! Remote supports iOS 4.0/Android 2.3 mobile devices or later versions. • For iOS devices, download the W-Fi GO! Remote from iTunes store. For Android devices, download the W-Fi GO! Remote from Google Play Store or from ASUS support DVD. Launching W-Fi GO! Remote Turn on your mobile device’s wireless connection.
PAGE 130
.e u W-Fi GO! Remote menu an ua ls The W-Fi GO! Remote’s user interface shown above is for reference only and may vary with the mobile device’s operating system. QVGA Medium Density (160, mdpi) (240 x 320) w .
PAGE 131
DLNA Media Hub DLNA Media Hub allows you to stream your multimedia iles to your DLNA-supported device and remotely control playback using your mobile device or your computer. Click to select media ile type Tick to select source location Click to refresh media iles Media iles pane Displays the target receiver’s name and the media ile currently playing .e u Click to go back to main menu Click to edit the playlist ua ls Using the DLNA Media Hub 2. From the main screen, click DLNA Media Hub.
PAGE 132
3. • Only computers under Windows® 7/8 support the DLNA Media Hub function. • Keep the Windows Media Player open. Ensure that your media ile formats supported on Windows Media Player and DLNA playback devices. Click any of the tabs to select your preferred media ile type. Playing music To play music: 1. 2. Click Music tab. Tick Library to view or play iles. ua ls Click a music ile, and click . an 3. .e u Tick Playlist and select an existing playlist from the dropdown list.
PAGE 133
Playing a video ile To play a video ile: 1. Click Video tab. 2. Tick Library to view the video iles from your local computer. Tick Playlist to view the video iles saved in your proile. 3. Click the video ile you want to watch, and click . Change the resolution from the Quality dropdown list. .e u Editing the video library 1. Tick Library. 2. Click iles. 3. Click Add and locate the ile from the directory. To delete, tick the selected ile and click Delete. 4. Click OK.
PAGE 134
Viewing the images To view the images: 1. Click Photo tab. 2. Tick Library to view the image iles from your local computer. Tick Playlist to view the image iles saved in your proile. An image slideshow plays when pressing . Editing the image library 1. Tick Library. 2. Click iles. 3. Click Add and locate the ile from the directory. To delete, tick the selected ile and click Delete. 4. Click OK. .
PAGE 135
Using the DLNA Media Hub via W-Fi GO! Remote You can access the DLNA Media Hub on your mobile device via W-Fi GO! Remote. 1. Tap DLNA Media Hub. 2. Select and tap the receiver name. 3. The mobile device shows the information of the DLNA Media Hub function. Tap Enter to proceed to the Remote GO! function. 4. Tap Music, Video or Photo, to play. .e u Your mobile device’s WI-FI GO! Remote interface may vary with the mobile device’s operating system.
PAGE 136
3. Select a suitable codec Auto, Speed optimization, or Image optimization for your mobile device. 4. Click Apply. Click to select a video codec .e u Application help an ua ls Click to go back to previous screen em Using the Remote Desktop via W-Fi GO! Remote w w w .d ev ic When the Remote Desktop is enabled, the mobile device shows the contents of your desktop.
PAGE 137
File Transfer Allows you to transfer iles wirelessly between your computer and mobile device. Before using File Transfer, ensure that your computer is connected to your mobile device. For more details, refer to the section Wi-Fi GO! Remote. Application help .
PAGE 138
Tap to select the ile’s source location Tap to select iles for transfer Tap to select all iles Tap to clear all iles .e u Tap to send selected iles ua ls The W-Fi GO! Remote’s user interface shown above is for reference only and may vary with the mobile device’s operating system. an Securing your computer for Wi-Fi GO! Remote functions To create a password: em Remote GO! Settings allows you to create a password for your computer. 1. Click 2. Tick Use Password and key in your password. 3.
PAGE 139
5 RAID support 5.1 RAID conigurations The motherboard comes with the AMD® chipset that allows you to conigure Serial ATA hard disk drives as RAID sets. The motherboard supports the following RAID conigurations: RAID 0, RAID 1, RAID 5 and RAID 10. • Due to Windows® XP limitation, a RAID array with the total capacity over 2TB cannot be set as a boot disk. A RAID array over 2TB can only be set as a data disk only.
PAGE 140
5.1.2 Installing Serial ATA hard disks The motherboard supports Serial ATA hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array. To install the SATA hard disks for a RAID coniguration: 1. Install the SATA hard disks into the drive bays. 2. Connect the SATA signal cables. 3. Connect a SATA power cable to the power connector on each drive. 5.1.3 Setting the RAID item in BIOS .
PAGE 141
5.1.4 AMD® Option ROM utility To enter the AMD® Option ROM utility: Turn on the system. 2. During POST, press + to display the utility main menu. ev ic em an ua ls .e u 1. The Main Menu allows you to select an operation to perform. The Main Menu options include: View Drive Assignments: shows the status of the hard disk drives. • LD View / LD Deine Menu: displays the existing RAID set information / creates a RAID 0, RAID 1, RAID 5 or RAID 10 coniguration.
PAGE 142
Creating a RAID volume To create a RAID volume: In the Main Menu, press <2> to enter the LD View / LD Deine Menu function. 2. Press + , and the following screen appears. ua ls .e u 1. Move to the RAID Mode item and press to select a RAID mode to create. Move to the Assignment item by using the down arrow key and set Y to select the hard disk drives you want to include in the RAID set. 5. Press + to save the setting. 6. The utility prompts the following message.
PAGE 143
Deleting a RAID coniguration Be cautious when deleting a RAID volume. You will lose all data on the hard disk drives when you delete a RAID volume. To delete a RAID volume: In the Main Menu, press <3> to enter the Delete LD function. 2. Select the RAID item you want to delete and press ~~or + . 3. The utility prompts the following messages: ev ic em an ua ls .e u 1. .d Press + to delete the RAID volume.~~
PAGE 144
5.2 Creating a RAID driver disk A loppy disk with the RAID driver is required when installing a Windows® operating system on a hard disk drive that is included in a RAID set. 5.2.1 • The motherboard does not provide a loppy drive connector. You have to use a USB loppy disk drive when creating a SATA RAID driver disk. • Windows® XP may not recognize the USB loppy disk drive due to Windows® XP limitation. To work around this OS limitation, refer to section 5.2.4 Using a USB loppy disk drive.
PAGE 145
5.2.3 Installing the RAID driver during Windows® OS installation To install the RAID driver in Windows® XP: During the OS installation, the system prompts you to press the key to install third-party SCSI or RAID driver. 2. Press , and then insert the loppy disk with RAID driver into the USB loppy disk drive. 3. When prompted to select the SCSI adapter to install, select the RAID driver for the corresponding OS version. 4.
PAGE 146
5.2.4 Using a USB loppy disk drive Due to OS limitation, Windows® XP may not recognize the USB loppy disk drive when you install the RAID driver from a loppy disk during the OS installation. To solve this issue, add the USB loppy disk drive’s Vendor ID (VID) and Product ID (PID) to the loppy disk containing the RAID driver. Refer to the steps below: 1. Using another computer, plug the USB loppy disk drive, and insert the loppy disk containing the RAID driver. 2.
PAGE 147
Use Notepad to open the ile. 8. Find the [HardwareIds.scsi.iaAHCI_DesktopWorkstationServer] and [HardwareIds.scsi.iaStor_DesktopWorkstationServer] sections in the txtsetup.oem ile. 9. Type the following line to the bottom of the two sections: em an ua ls .e u 7. w w w .d ev ic id = “USB\VID_xxxx&PID_xxxx”, “usbstor” Add the same line to both sections. 10. Chapter 5 The VID and PID vary with different vendors. Save and exit the ile.
PAGE 148
.e u ua ls an em ev ic .
PAGE 149
Multiple GPU support AMD® CrossFireX™ technology 6.1 6 The motherboard supports the AMD® CrossFireX™ technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section. 6.1.1 Requirements In Dual CrossFireX mode, you should have two identical CrossFireX-ready graphics cards or one CrossFireX-ready dual-GPU graphics card that are AMD® certiied. • Ensure that your graphics card driver supports the AMD CrossFireX technology.
PAGE 150
6.1.3 Installing two CrossFireX™ graphics cards The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same. Prepare two CrossFireX-ready graphics cards. 2. Insert the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 1 in this user manual for the locations of the PCIEX16 slots recommended for multi-graphics card installation. 3.
PAGE 151
5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately. 6. Connect a VGA or a DVI cable to the graphics card. 6.1.4 Installing the device drivers .e u Refer to the documentation that came with your graphics card package to install the device drivers. 6.1.5 an ua ls Ensure that your PCI Express graphics card driver supports the AMD® CrossFireX™ technology. Download the latest driver from the AMD website (www.amd.com).
PAGE 152
Enabling Dual CrossFireX technology In the Catalyst Control Center window, click Performance > AMD CrossFireXTM. 2. Select Enable CrossFireXTM. 3. Select a GPU combination from the drop-down list. 4. Click Apply to save and activate the GPU settings made. .e u 1. ua ls 2 3 4 w w w .
PAGE 153
AMD® Dual Graphics technology 6.2 The motherboard supports the AMD® Dual Graphics technology that allows you to install multi-graphics processing units (GPU) CrossFireX cards. 6.2.1 System requirements Before using AMD Dual Graphics, ensure that your system meets the following basic requirements: • Operating System: Windows® 7 • Memory capacity: Minimum 2GB • APU: A-Series • On-board graphics card RAM: 256MB Before you proceed ua ls 6.2.2 .
PAGE 154
6.2.4 Using the AMD® CATALYST® Control Center Using an add-on graphics card Install a graphics card onto your motherboard. Refer to the User Guide that comes with your graphics card for details. 2. Right-click on the Windows® desktop, then click AMD CATALYST(R) Control Center from the shortcut menu. The AMD CATALYST Control Center screen appears. 3. Click Graphics Settings > CrossFire™, then select the Enable CrossFire™ check box. When a conirmation message pops up, click Yes.
PAGE 155
Right-click on the Windows® desktop, then click Personalize from the shortcut menu. 5. Click Display Settings. Select [Default Monitor] on ATI Radeon HD 4250 Graphics, then select the check boxes of This is my main monitor and Extend the desktop onto this monitor. Click OK, and then Yes from the conirmation window. 6. Restart the system. Right-click on the Windows® desktop, then click AMD CATALYST(R) Control Center from the shortcut menu. The AMD CATALYST Control Center screen appears. 7.
PAGE 156
6.3 LucidLogix Virtu MVP LucidLogix Virtu MVP allows your computer’s VGA output and discrete graphic cards to perform better, respond faster and process media iles smoother within a low power environment. Its GPU virtualization assigns tasks to the best available graphic source while the newly-designed Virtual Vsync gives you a smoother gaming experience.
PAGE 157
6.3.2 Setting up your display LucidLogix Virtu MVP solution comes with two distinct modes that allows you to enjoy better graphics either from your built-in video output (i-Mode) or from a discrete graphics card (dMode). i-Mode To use LucidLogix Virtu MVP in i-Mode, the display must be connected to the onboard video output. Ensure to set the Primary Display to iGPU in BIOS to activate i-Mode support. .
PAGE 158
6.3.3 Coniguring LucidLogix Virtu MVP Launch the Virtu MVP Control Panel to allow you to conigure the main features, adjust the performance settings and select applications for graphical virtualization. .e u To open the control panel, right-click LucidLogix Virtu MVP icon in the notiication area and select Open Virtu MVP Control Panel. an ua ls LucidLogix Virtu MVP is automatically activated when your system is powered on.
PAGE 159
Performance Allows you to turn ON/OFF the Hyperformance® or Virtual Vsync function. Click to turn Hyperformance® ON or OFF Chapter 6 w w w .d ev ic em an ua ls .
PAGE 160
Applications Allows you to select applications for graphic virtualization. an ua ls .e u Click to select a program to run by discrete card, iGPU, or Hyperformance® em Click to add, edit, or remove programs ev ic See the descriptions of these columns below: D column allows you to run applications with the discrete graphic card. Select D to enable 3D graphical performance for that application. • I column allows to run applications with iGPU.
PAGE 161
Appendices Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received including interference that may cause undesired operation. an ua ls .e u This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 162
IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B speciications. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. This device complies with Industry Canada license exempt RSS standard(s).
PAGE 163
REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling.
PAGE 164
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax E-mail Web site 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 +886-2-2894-3447 +886-2-2890-7798 info@asus.com.tw www.asus.com.tw Technical Support Telephone Online support +86-21-38429911 support.asus.com ASUS COMPUTER INTERNATIONAL (America) 800 Corporate Way, Fremont, CA 94539, USA +1-812-282-3777 +1-510-608-4555 usa.asus.com ua ls .e u Address Telephone Fax Web site Technical Support +1-812-282-2787 +1-812-284-0883 support.asus.
PAGE 165
Per FCC Part 2 Section 2. 1077(a) Phone/Fax No: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.