User's Manual
Table Of Contents
- Sicherheitsinformationen
- Kapitel 1
- Produkteinführung
- Kapitel 2
- BIOS-Informationen
- 2.1 Verwalten und Aktualisieren des BIOS
- 2.2 BIOS-Setupprogramm
- 2.3 Main-Menü
- 2.4 Ai Tweaker-Menü
- 2.4.1 Ai Overclock Tuner [Auto]
- 2.4.2 Memory Frequency [Auto]
- 2.4.3 APU Multiplier [Auto]
- 2.4.4 EPU Power Saving Mode [Disabled]
- 2.4.5 DRAM Timing Control
- 2.4.6 Hybrid DIGI+ VRM
- 2.4.7 CPU Voltage [Offset Mode]
- 2.4.8 DRAM Voltage [Auto]
- 2.4.9 SB 1.1V Voltage [Auto]
- 2.4.10 1.1Vsb Voltage [Auto]
- 2.4.11 APU1.2V Voltage [Auto]
- 2.4.12 VDDA Voltage [Auto]
- 2.4.13 APU Spread Spectrum [Auto]
- 2.5 Advanced-Menü
- 2.6 Monitor-Menü
- 2.7 Boot-Menü
- 2.7.1 Bootup NumLock State [On]
- 2.7.2 Full Screen Logo [Enabled]
- 2.7.3 Wait for ‘F1’ If Error [Enabled]
- 2.7.4 Option ROM Messages [Force BIOS]
- 2.7.5 Setup Mode [EZ Mode]
- 2.7.6 UEFI/Legacy Boot [Enabled both UEFI and Legacy]
- 2.7.7 PCI ROM Priority [Legacy ROM]
- 2.7.8 Boot Option Priorities
- 2.7.9 Boot Override
- 2.8 Tools-Menü
- 2.9 Exit-Menü
- Anhang

ASUS F1A55-M L� R2.0-Serie 2-23
2.7 Boot-Menü
Die Elemente im Boot-Menü gestatten Ihnen, die Systemstartoptionen zu ändern.
2.7.1 Bootup NumLock State [On]
[On] Setzt den Startstatus von NumLock auf [On].
[Off] Setzt den Startstatus von NumLock auf [Off].
2.7.2 Full Screen Logo [Enabled]
[Enabled] Aktiviert die Anzeigefunktion für das Vollbildlogo.
[Disabled] Deaktiviert die Anzeigefunktion für das Vollbildlogo.
Wählen Sie [Enabled], um die ASUS MyLogo2™-Funktion zu verwenden.
Post Report [5 sec]
Dieses Element erscheint nur, wenn Sie Full Screen Logo zu [Disabled] setzen und
erlaubt die Einstellung der Systemwartezeit, bis der POST-Bericht angezeigt wird.
Kongurationsoptionen: [1 sec] [2 sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec] [8 sec] [9 sec]
[10 sec] [Until Press ESC]
2.7.3 Wait for ‘F1’ If Error [Enabled]
Bei Einstellung auf [Enabled] wartet das System auf das Drücken der F1-Taste, wenn Fehler
auftreten. Kongurationsoptionen: [Disabled] [Enabled]
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
Version 2.10.1208. Copyright (C) 2012 American Megatrends, Inc.
Select the keyboard NumLock state
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
UEFI BIOS Utility - Advanced Mode
Bootup NumLock State On
Full Screen Logo Enabled
Wait For ‘F1’ If Error Enabled
Option ROM Messages Force BIOS
Setup Mode EZ Mode
UEFI/Legacy Boot Enabled both...
PCI ROM Priority Legacy ROM
Boot Option Priorities
Boot Option #1 SATA: xxxxxxx
Boot Option #2 SATA: xxxxxxx
Boot Override
> SATA: xxxxxxxxxxxx
> Hard Drive BBS Priorities
> CD/DVD ROM Drive BBS Priorities