User's Manual
Table Of Contents
- Sicherheitsinformationen
- Kapitel 1
- Produkteinführung
- Kapitel 2
- BIOS-Informationen
- 2.1 Verwalten und Aktualisieren des BIOS
- 2.2 BIOS-Setupprogramm
- 2.3 Main-Menü
- 2.4 Ai Tweaker-Menü
- 2.4.1 Ai Overclock Tuner [Auto]
- 2.4.2 Memory Frequency [Auto]
- 2.4.3 APU Multiplier [Auto]
- 2.4.4 EPU Power Saving Mode [Disabled]
- 2.4.5 DRAM Timing Control
- 2.4.6 Hybrid DIGI+ VRM
- 2.4.7 CPU Voltage [Offset Mode]
- 2.4.8 DRAM Voltage [Auto]
- 2.4.9 SB 1.1V Voltage [Auto]
- 2.4.10 1.1Vsb Voltage [Auto]
- 2.4.11 APU1.2V Voltage [Auto]
- 2.4.12 VDDA Voltage [Auto]
- 2.4.13 APU Spread Spectrum [Auto]
- 2.5 Advanced-Menü
- 2.6 Monitor-Menü
- 2.7 Boot-Menü
- 2.7.1 Bootup NumLock State [On]
- 2.7.2 Full Screen Logo [Enabled]
- 2.7.3 Wait for ‘F1’ If Error [Enabled]
- 2.7.4 Option ROM Messages [Force BIOS]
- 2.7.5 Setup Mode [EZ Mode]
- 2.7.6 UEFI/Legacy Boot [Enabled both UEFI and Legacy]
- 2.7.7 PCI ROM Priority [Legacy ROM]
- 2.7.8 Boot Option Priorities
- 2.7.9 Boot Override
- 2.8 Tools-Menü
- 2.9 Exit-Menü
- Anhang

v
Inhalt
2.6.2 CPU / Chassis Fan Speed [xxxx RPM]
or [Ignore] / [N/A] ........................................................... 2-21
2.6.3 CPU Q-Fan Control [Enabled] ...................................... 2-21
2.6.4 CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage .. 2-22
2.6.5 Anti Surge Support [Enabled] ....................................... 2-22
2.7 Boot-Menü .................................................................................. 2-23
2.7.1 Bootup NumLock State [On] ......................................... 2-23
2.7.2 Full Screen Logo [Enabled] ........................................... 2-23
2.7.3 Wait for ‘F1’ If Error [Enabled] ....................................... 2-23
2.7.4 Option ROM Messages [Force BIOS] ........................... 2-24
2.7.5 Setup Mode [EZ Mode] ................................................. 2-24
2.7.6 UEFI/Legacy Boot [Enabled both UEFI and Legacy] .... 2-24
2.7.7 PCI ROM Priority [Legacy ROM] .................................. 2-24
2.7.8 Boot Option Priorities .................................................... 2-24
2.7.9 Boot Override ................................................................ 2-24
2.8 Tools-Menü ................................................................................. 2-25
2.8.1 ASUS EZ Flash 2 Utility ................................................ 2-25
2.8.2 ASUS O.C. Prole ......................................................... 2-25
2.8.3 ASUS SPD Information ................................................. 2-25
2.9 Exit-Menü .................................................................................... 2-26
Anhang
Hinweise ....................................................................................................A-1