User's Manual

ASUS All-in-One PC ET1620I
8
Safety information
Your All-in-One PC ET1620I is designed and tested to meet the latest
standards of safety for information technology equipment. However,
to ensure your safety, it is important that you read the following safety
instructions.
Setting up your system
Read and follow all instructions in the documentation before you operate
your system.
Do not use this product near water or a heated source such as a radiator.
Set up the system on a stable surface.
Openings on the chassis are for ventilation. Do not block or cover these
openings. Ensure that you leave plenty of space around the system for
ventilation. Never insert objects of any kind into the ventilation openings.
Use this product in environments with ambient temperatures between
0˚ C and 40˚ C.
If you use an extension cord, ensure that the total ampere rating of the
devices plugged into the extension cord does not exceed its ampere
rating.
Care during use
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned o, a small amount of electrical current still
remains in the product. Always unplug all power, modem, and network
cables from the power outlets before cleaning the system.
The touch screen requires periodic cleaning to perform at optimal touch
sensitivity. Keep the screen clean from foreign objects or excessive dust
accumulation. To clean the screen:
- Turn o the system and disconnect the power cord from the wall.
- Spray a small amount of household glass cleaner on the bundled
cleaning cloth and gently wipe the surface of the screen.
- Do not spray the cleaner directly on the screen.
- Do not use an abrasive cleaner or a coarse cloth when cleaning the
screen.
•
•
•
•
•
•
•
•
•
•