User guide
4
ASUS Essence One Series
Safety Information
For your own safety please read the following important safety instructions carefully
before attempting to connect this unit to the mains power supply. They will also enable
you to get the best performance from and prolong the life of the unit.
Voltage Selection
The rear panel includes a voltage selection switch with two settings: ‘115’ and ‘230’.
Check to see that it is properly congured for your location before connecting AC
power. Actually, the AC input has a very wide input voltage range and can operate
over a frequency range of 47.5 to 52.5 or 57 to 63 Hz. At 115, the Essence One Series
will operate normally over a range of 95 to 132 VAC. At 230, the Essence One Series will
operate normally over a range of 190 to 264 VAC.
CAUTION: Always insure that the voltage setting is correct for your locality.
Incorrect conguration may blow fuses or cause erratic operation.
230
230V 115V
115
VOLTAGE SELECTOR VOLTAGE SELECTOR
Repairs
Do not service or repair this product unless properly qualied. Only a qualied
technician should perform repairs.
Fuses
The fuse holder is built into a drawer next to the IEC power connector.
CAUTION: For continued re hazard protection always replace the fuses with
the correct size and type (1A 250V, 5 x 20 mm).
Use tools to replace the fuses.