User Manual

Table Of Contents
Chapter 2: Hardware Setup
2-20
2.6.3 Installing an HBA/RAID card
1. Prepare the HBA/RAID card.
2. Follow steps 1-6 from
The front PCIe riser card bracket
to install the card to the riser
bracket.
3. Connect the Slimline SAS cables from the HBA/RAID card (A) to the NVMe/SATA/SAS
backplane (B). Refer to the section
NVMe/SATA/SAS backplane
for the locations of
the SLMPCIE connectors.
The illustration above is for reference only.
For more information or assistance, please refer to www.asus.com.