User Manual

3-37
ASUS ESC8000A-E11
Egress Poison Mask High [FFFCFFFF]
These set the enable mask for masking of errors logged in EGRESS_
POISON_STATUS. For each bit set to 1, errors are masked. For each bit set to
0, errors trigger response actions.
Egress Poison Mask Low [FFFFFFFB]
These set the enable mask for masking of errors logged in EGRESS_
POISON_STATUS. For each bit set to 1, errors are masked. For each bit set to
0, errors trigger response actions.
Uncorrected Converted to Poison Enable Mask High [30000]
These set the enable mask for masking of uncorrectable parity errors on
internal arrays. For each bit set to 1, a system fatal error event is triggered for
UCP errors on arrays associated with that egress port. For each bit set to 0,
errors are masked.
Uncorrected Converted to Poison Enable Mask Low [4]
These set the enable mask for masking of uncorrectable parity errors on
internal arrays. For each bit set to 1, a system fatal error event is triggered for
UCP errors on arrays associated with that egress port. For each bit set to 0,
errors are masked.
System Hub Watchdog Timer [A28]
This value specifies the timer interval of the SYSHUB Watchdog Timer in
milliseconds.
SLINK Read Response OK [Disabled]
This value specifies whether SLINK read response errors are converted to
an Okay response. When this value is set to TRUE, read response errors are
converted to Okay responses with data of all FFs. When set to FALSE, read
response errors are not converted.
Configuration options: [Disabled] [Enabled]
SLINK Read Response Error Handling [Log Errors in MCA]
This value specifies whether SLINK write response errors are converted
to an Okay response. When this value is set to 0, write response errors
will be logged in the MCA. When set to 1, write response errors will trigger
an MCOMMIT error. When this value is set to 2, write response errors are
converted.
Configuration options: [Enabled] [Trigger MCOMMIT Error] [Log Errors in MCA]
Log Poison Data from SLINK [Disabled]
This value specifies whether poison data propagated from SLINK will generate
a deferred error. When this value is set to TRUE, deferred errors are enabled.
When set to FALSE, errors are not generated.
Configuration options: [Disabled] [Enabled]
PCIe Aer Reporting Mechanism [Auto]
This value selects the method of reporting AER errors from PCI Express.
A value of 0 indicates that the hardware will report the error through MCA.
A value of 1 allows OS First handling of the errors through generation of a
system control interrupt (SCI). A value of 2 allows Firmware First handling of
the errors through generation of a system control interrupt (SCI).
Configuration options: [Firmware First] [OS First] [Auto]
Edpc Control [Auto]
Configuration options: [Disabled] [Enabled] [Auto]
NBIO Poison Consumption [Auto]
Configuration options: [Disabled] [Enabled] [Auto]
Sync Flood on PCIe Fatal Error [Auto]
Configuration options: [Auto] [True] [False]