User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 Air ducts
- 2.3 Central Processing Unit (CPU)
- 2.4 System memory
- 2.5 Storage devices
- 2.6 Expansion slots
- 2.6.1 Installing an expansion card to the front PCIe riser card bracket (on select models)
- 2.6.2 Installing an ASUS PIKE II card
- 2.6.3 Installing an HBA/RAID card
- 2.6.4 Installing an expansion card to the rear left PCIe expansion card bracket (on select models)
- 2.6.5 Installing an expansion card to the rear right PCIe expansion card bracket (on select models)
- 2.6.6 Installing an OCP 3.0 card to the rear right OCP 3.0 socket board (on select models)
- 2.6.7 (optional) Installing the PFR module
- 2.7 Cable connections
- 2.8 Removable/optional components
- 2.9 Installing GPU cards
- 2.10 Installing Optional Kits
- Chapter 3: BIOS Setup
- 3.1 Managing and updating your BIOS
- 3.2 BIOS setup program
- 3.3 Main menu
- 3.4 Performance Tuning menu
- 3.5 Advanced menu
- 3.5.1 Trusted Computing
- 3.5.2 PSP Firmware Versions
- 3.5.3 Redfish Host Interface Settings
- 3.5.4 AMD CBS
- 3.5.5 APM Configuration
- 3.5.6 Serial Port Console Redirection
- 3.5.7 CPU Configuration
- 3.5.8 PCI Subsystem Settings
- 3.5.9 USB Configuration
- 3.5.10 Network Stack Configuration
- 3.5.11 CSM Configuration
- 3.5.12 NVMe Configuration
- 3.5.13 SATA Configuration
- 3.5.14 AMD Mem Configuration Status
- 3.5.15 Tls Auth Configuration
- 3.6 Chipset menu
- 3.7 Security menu
- 3.8 Boot menu
- 3.9 Tool menu
- 3.10 Save & Exit menu
- 3.11 Event Logs menu
- 3.12 Server Mgmt menu
- Chapter 4: Driver Installation
- Appendix
3-16
Chapter 3: BIOS Setup
Core Watchdog
Core Watchdog Timer Enable [Auto]
Allows you to enable or disable CPU Watchdog Timer.
Configuration options: [Disable] [Enable] [Auto]
The following items are only available when Core Watchdog Timer Enable is set to
[Enabled].
Core Watchdog Timer Interval [Auto]
Configuration options: [21.461s] [10.730s] [5.364s] [2.681s] [1.340s]
[669.41ms] [334.05ms] [166.37ms] [82.53ms] [40.61ms] [20.970ms]
[10.484ms] [5.241ms] [2.620ms] [1.309ms] [654.08us] [326.4us] [162.56us]
[80.64us] [39.68us] [Auto]
Core Watchdog Timer Severity [Auto]
Allows you to specify the CPU watch dog timer severity.
Configuration options: [No Error] [Transparent] [Corrected] [Deferred]
[Uncorrected] [Fatal] [Auto]
RedirectForReturnDis [Auto]
This option is from a workaround for GCC/C000005 issue for XV Core on
CZ A0, setting MSRC001_1029 Decode Configuration (DE_CFG) bit 14
[DecfgNoRdrctForReturns] to 1.
Configuration options: [Auto] [1] [0]
Platform First Error Handling [Auto]
This option is from a workaround for GCC/C000005 issue for XV Core on
CZ A0, setting MSRC001_1029 Decode Configuration (DE_CFG) bit 14
[DecfgNoRdrctForReturns] to 1.
Configuration options: [Auto] [1] [0]
Core Performance Boost [Auto]
This option allows you to enable or disable CPB.
Configuration options: [Disabled] [Auto]
Global C-state Control [Auto]
This option allows you to control IO based C-state generation and DF C-states.
Configuration options: [Disabled] [Enabled] [Auto]
Power Supply Idle Control [Auto]
Configuration options: [Low Current Idle] [Typical Current Idle] [Auto]
SEV ASID Count [Auto]
This field specifies the maximum valid ASID, which affects the maximum system
physical address space. 16TB of physical address space is available for systems that
support 253 ASIDs, while 8TB of physical address space is available for systems that
support 509 ASIDs.
Configuration options: [253 ASIDs] [509 ASIDs] [Auto]
SEV-ES ASID Space Limit Control [Auto]
Configuration options: [Auto] [Manual]