User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Ai Tweaker
- 4.5 Performance Tuning menu
- 4.6 Advanced menu
- 4.6.1 Trusted Computing
- 4.6.2 ACPI Settings
- 4.6.3 Smart Settings
- 4.6.4 Super IO Configuration
- 4.6.5 Serial Port Console Redirection
- 4.6.6 Onboard LAN Configuration
- 4.6.7 APM
- 4.6.8 PCI Subsystem Settings
- 4.6.9 USB Configuration
- 4.6.10 CSM Configuration
- 4.6.11 NVMe Configuration
- 4.6.12 Network Stack Configuration
- 4.6.13 iSCSI Configuration
- 4.7 Platform Configuration menu
- 4.8 Socket Configuration menu
- 4.9 Event Logs menu
- 4.10 Server Mgmt menu
- 4.11 Security menu
- 4.12 Boot menu
- 4.13 Tool menu
- 4.14 Save & Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Driver Installation
- Appendix
Chapter 2: Hardware Setup
2-24
5. Remove the two (2) screws on the
ASUS PIKE II card (A), then remove the
card bracket (B).
Card bracket
6. Secure the ASUS PIKE II card to the
ASUS PIKE II card bracket with the two
(2) screws that you removed earlier.
ASUS PIKE II card bracket
7. Connect the mini-SAS HD cables to the ASUS PIKE II card (A), insert the ASUS PIKE
II card and the ASUS PIKE II card bracket into the PCI-E slot on the motherboard (B),
then secure it with the two (2) screws that you removed earlier (C).
Connect to ASUS
PIKE II card slot 1
Connect to ASUS
PIKE II card slot 2