User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Ai Tweaker
- 4.5 Performance Tuning menu
- 4.6 Advanced menu
- 4.6.1 Trusted Computing
- 4.6.2 ACPI Settings
- 4.6.3 Smart Settings
- 4.6.4 Super IO Configuration
- 4.6.5 Serial Port Console Redirection
- 4.6.6 Onboard LAN Configuration
- 4.6.7 APM
- 4.6.8 PCI Subsystem Settings
- 4.6.9 USB Configuration
- 4.6.10 CSM Configuration
- 4.6.11 NVMe Configuration
- 4.6.12 Network Stack Configuration
- 4.6.13 iSCSI Configuration
- 4.7 Platform Configuration menu
- 4.8 Socket Configuration menu
- 4.9 Event Logs menu
- 4.10 Server Mgmt menu
- 4.11 Security menu
- 4.12 Boot menu
- 4.13 Tool menu
- 4.14 Save & Exit menu
- Chapter 5: RAID Configuration
- Chapter 6: Driver Installation
- Appendix
4-35
ASUS ESC8000 G4 Series
4.8.3 UPI Configuration
UPI General Configuration
UPI Status
This item displays information about the UPI status.
Link Speed Mode [Fast]
This item allows you to select the UPI link speed as either the fast mode or slow mode.
Configuration options: [Slow] [Fast]
Link Frequency Select [Auto]
This item allows for selecting the UPI link frequency.
Configuration options: [Auto] [9.6 GB/s] [10.4 GB/s] [Use Per Link Setting]
UPI Link0p Enable [Enabled]
Configuration options: [Disabled] [Enabled] [Auto]
UPI Link1 Enable [Enabled]
Configuration options: [Disabled] [Enabled] [Auto]
Directory Mode Enable [Enabled]
Configuration options: [Disabled] [Enabled]
SNC [Disabled]
Configuration options: [Disabled] [Enabled] [Auto]
KTI Prefetch [Enabled]
Configuration options: [Disabled] [Enabled]
Local/Remote Threshold [Auto]
Configuration options: [Disabled] [Auto] [Low] [Medium] [High]
Stale AtoS [Disabled]
Configuration options: [Disabled] [Enabled] [Auto]
LLC dead line alloc [Enabled]
Configuration options: [Disabled] [Enabled] [Auto]