User Guide

2-19
ASUS ESC8000 G3
1
2
RESET
1
2
RESET
5. Place the Serial ATA (SATA) HDD/SAS HDD into the tray. Ensure that the SATA HDD/
SAS HDD is tted rmly inside the drive tray and that the four screws of the HDD
matches the four screw holes of the drive tray.
6. Secure the SATA HDD/SAS HDD to the drive tray with the four bundled screws.
7. Align and insert the 2.5-inch SATA HDD/SAS HDD and drive tray assembly into the
drive bay.
8. Press the tray lever until it clicks in place.
9. Press the spring lock to secure the 2.5-inch SATA HDD/SAS HDD and drive tray
assembly.
10. Repeat step 1-9 to install the other 2.5-inch SATA HDD/SAS HDDs.
Hard disk drive