User Guide

Chapter 2: Hardware Setup
2-2
2.1 Chassis covers
To remove the rear chassis cover:
1. Remove the two (A) thumbscrews on the rear then remove the four screws on the side
(B).
2. Slightly move the rear chassis cover toward the rear then lift to completely remove it
from the chassis.
To remove the front chassis cover:
1. Remove the four (A) screws on the side then remove the ve screws on the top (B).
2. Slightly move the front chassis cover toward the rear then lift to completely remove it
from the chassis.
A protection lm is pre-attached to the system cover before shipping. Remove the
protection lm before turning on the system for proper heat dissipation.