User Guide

6-28
Chapter 6: RAID Conguration
5. Usetheup/downarrowkeystoselectadrive,press<TAB>toselectaMasterdisk,and
thenpress<SPACE>toselectaRecoverydisk.Asmalltrianglemarkstheselected
drive.Press<Enter>aftercompletingyourselection.
6. Whenthe
Sync
itemisselected,usetheup/downarrowkeystoselectasyncoption
thatyouwantandpress<Enter>.
7. Whenthe
Create Volume
itemisselected,press<Enter>.Thefollowingwarning
message appears.
WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.
Are you sure you want to create this volume? (Y/N):
8. Press<Y>tocreatetherecoverysetandreturntothemainmenu,or<N>togoback
to the
CREATE VOLUME
menu.
Ifarecoverysetiscreated,youcannotaddmoreRAIDsetsevenwhenyouhavemore
non-RAIDdisksinstalledinyoursystem.
2. Enteranamefortherecoverysetandpress<Enter>.
3. Whenthe
RAID Level
itemisselected,presstheup/downarrowkeystoselect
Recovery
,andthenpress<Enter>.
4. Whenthe
Disks
itemisselected,press<Enter>toselecttheharddiskdrivesyouwant
to include in the recovery set. The
SELECT DISKS
screen appears.
[ SELECT DISKS ]
Port Drive Model Serial # Size Status
0 ST3300656SS HWAS0000991753TR 279.3GB Non-RAID Disk
1 ST3300656SS 37VN00009846RAJ1 279.3GB Non-RAID Disk
2 ST3300656SS 397600009846UEDY 279.3GB Non-RAID Disk
3 ST3300656SS GWC50000991756G6 279.3GB Non-RAID Disk
Select 1 Master and 1 Recovery disk to create volume.
[[
↑↓
]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done