User Guide

6-26
Chapter 6: RAID Conguration
6.3.1 Creating a RAID set
To create a RAID set:
1. Fromtheutilitymainmenu,select1.CreateRAIDVolumeandpress<Enter>.
2. KeyinanamefortheRAIDsetandpress<Enter>.
3. Presstheup/downarrowkeystoselectaRAIDLevelthatyouwishtocreatethen
press<Enter>.
4. FromtheDisksitemeld,press<Enter>toselecttheharddiskdrivesthatyouwantto
include in the RAID set.
5. Usetheup/downarrowkeystomovetheselectionbarthenpress<Space>toselecta
disk.AsmalltrianglebeforethePortnumbermarkstheselecteddrive.Press<Enter>
when you are done.
[ESC]-Previous Menu [ENTER]-Select[ ]Change
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU ]
[ HELP ]
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Syne:
Create Volume
Enter a unique volume name that has no special characters and is
16 characters or less.
Volume0
RAID0(Strips)
Select Disks
128KB
0.0 GB
N/A
[TAB]-Next
[ SELECT DISKS ]
Port Drive Model Serial # Size Status
0 ST3300656SS HWAS0000991753TR 279.3GB Non-RAID Disk
1 ST3300656SS 37VN00009846RAJ1 279.3GB Non-RAID Disk
2 ST3300656SS 397600009846UEDY 279.3GB Non-RAID Disk
3 ST3300656SS GWC50000991756G6 279.3GB Non-RAID Disk
Select 2 to 6 disks to use in creating the volume.
[ ]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done