User Guide

Table Of Contents

6-24

Chapter 6: RAID Conguration

6.3 Intel

Rapid Storage Technology enterprise SCU/

SATA Option ROM Utility

The Intel

RapidStorageTechnologyenterpriseSCU/SATAOptionROMutilityallowsyou

tocreateRAID0,RAID1,RAID10(RAID1+0),andRAID5set(s)fromSerialATAharddisk

drives that are connected to the Serial ATA connectors supported by the Southbridge.

YoucancreateRAIDmodebyuseofonboardAHCISATAports.Also,wheninstalled

optionalASRKmodule,youcanuseonboardscuSASportstocreateRAIDmode.

To use onboard SATA ports:

1. InstallalltheSerialATAharddiskdrives.

2. Turningonthesystem.DuringPOST,press<Delete>toenterBIOS.Goto

Advanced

>

PCH SATA Configuration

>

SATA Mode

,thenpress<Enter>.

3. Set

SATA Mode

RAID Mode

andsave,thenrebootsystem.

4. DuringPOST,press<Ctrl+I>todisplaytheutilitymainmenu.

TouseSCUSATAports:

1. InstallalltheSATAharddiskdrives.

2. Turningonthesystem.DuringPOST,press<Del>toenterBIOS.Goto

Advanced

>

PCH SCU SAS Configuration

,thenpress<Enter>.

3. ConrmalltheSASharddiskdrivesyouinstalledarecorrectlydisplayed,thenreboot

system.

4. DuringPOST,press<Ctrl+I>todisplaytheutilitymainmenu.