User Manual
Table Of Contents
- Notices
- Chapter 1: Product Introduction
- Chapter 2: Getting Started
- Chapter 3: Web-based User Interface
- 3.1 Web-based user interface
- 3.2 Dashboard
- 3.3 Sensor
- 3.4 System Inventory
- 3.5 FRU Information
- 3.6 Logs & Reports
- 3.7 Settings
- 3.7.1 Captured BSOD
- 3.7.2 Date & Time
- 3.7.3 External User Services
- 3.7.4 KVM Mouse Setting
- 3.7.5 Log Settings
- 3.7.6 Manage Licenses
- 3.7.7 Media Redirection Settings
- 3.7.8 Network Settings
- 3.7.9 PAM Order Settings
- 3.7.10 Platform Event Filters
- 3.7.11 NIC Management
- 3.7.12 Services
- 3.7.13 SMTP Settings
- 3.7.14 SSL Settings
- 3.7.15 System Firewall
- 3.7.16 User Management
- 3.7.17 Video Recording
- 3.7.18 IPMI Interfaces
- 3.7.19 Fan Control
- 3.7.20 PSU Cold Redundancy
- 3.8 Remote Control
- 3.9 Image Redirection
- 3.10 Power Control
- 3.11 Locator LED
- 3.12 Maintenance
- Appendix
2-4
Chapter 2: Getting Started
2.4 BIOS configuration
Follow the below steps to configure the BIOS before connecting to the ASMB11-iKVM board.
• Update the remote server BIOS file following the instructions in the motherboard/
system user guide. Visit www.asus.com to download the latest BIOS file for the
motherboard.
• The BIOS setup screens shown in this section are for reference purposes only, and
may not exactly match what you see on your screen.
2.4.1 Running the BIOS BMC configuration
To configure the BMC in the BIOS:
1. Restart the remote server, then press <Del> during POST to enter the BIOS setup.
2. Go to the
Server Mgmt
menu, then select the
BMC network configuration
sub-menu.
Use this sub-menu to configure the BMC settings.
3. When finished, press <F10> to save your changes and exit the BIOS setup.