User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 Air ducts
- 2.3 Central Processing Unit (CPU)
- 2.4 System memory
- 2.5 Storage devices
- 2.6 Expansion slots
- 2.6.1 Installing an expansion card to the front PCIe expansion card bracket (on select models)
- 2.6.2 Installing an ASUS PIKE II or RAID card
- 2.6.3 Installing the Cache Vault Power Module
- 2.6.4 Installing an expansion card to the rear PCIe expansion card slots (on select models)
- 2.6.5 Installing an OCP 3.0 card to the rear OCP 3.0 socket board (on select models)
- 2.6.6 (optional) Installing the PFR module
- 2.7 Cable connections
- 2.8 Removable/optional components
- 2.9 Installing optional kits
- Chapter 3: BIOS Setup
- 3.1 Managing and updating your BIOS
- 3.2 BIOS setup program
- 3.3 Main menu
- 3.4 Advanced menu
- 3.4.1 Trusted Computing
- 3.4.2 ACPI Settings
- 3.4.3 Redfish Host Interface Settings
- 3.4.4 Onboard LAN Configuration
- 3.4.5 Serial Port Console Redirection
- 3.4.6 SIO Configuration
- 3.4.7 PCI Subsystem Settings
- 3.4.8 USB Configuration
- 3.4.9 Network Stack Configuration
- 3.4.10 NVMe Configuration
- 3.4.11 APM Configuration
- 3.4.12 T1s Auth Configuration
- 3.4.13 Third-party UEFI driver configurations
- 3.5 Platform Configuration menu
- 3.6 Socket Configuration menu
- 3.7 Security menu
- 3.8 Boot menu
- 3.9 Tool menu
- 3.10 Event Logs menu
- 3.11 Server Mgmt menu
- 3.12 Save & Exit menu
- Chapter 4: Driver Installation
- Appendix
Chapter 2: Hardware Setup
2-34
4. Connect the 6-pin end of the power cable to an available power connector in the middle
of the server system.
5. Secure the air duct to the GPU card with two screws.
6. Align and insert the golden fingers of the GPU card into the PCIe slot on the PCIe SKU
board, then secure it using the two screws removed earlier.