User Manual

Table Of Contents
Chapter 2: Hardware Setup
2-26
2.6.5 Installing an OCP 3.0 card to the rear OCP 3.0
socket board (on select models)
LAN 1
LAN 2
DM
Insert and push the OCP 3.0 card all the way into the socket board (A), then secure the card
with the thumb screw (B).
2.6.6 (optional) Installing the PFR module
The optional PFR module will come pre-installed on your system and is connected to the PFR
module connector on your motherboard.
The illustration below is for reference only.
For more information or assistance, please refer to www.asus.com.
1. Locate the PFR module connector on your motherboard.