User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 Air ducts
- 2.3 Central Processing Unit (CPU)
- 2.4 System memory
- 2.5 Storage devices
- 2.6 Expansion slots
- 2.6.1 Installing an expansion card to the front PCIe expansion card bracket (on select models)
- 2.6.2 Installing an ASUS PIKE II or RAID card
- 2.6.3 Installing the Cache Vault Power Module
- 2.6.4 Installing an expansion card to the rear PCIe expansion card slots (on select models)
- 2.6.5 Installing an OCP 3.0 card to the rear OCP 3.0 socket board (on select models)
- 2.6.6 (optional) Installing the PFR module
- 2.7 Cable connections
- 2.8 Removable/optional components
- 2.9 Installing optional kits
- Chapter 3: BIOS Setup
- 3.1 Managing and updating your BIOS
- 3.2 BIOS setup program
- 3.3 Main menu
- 3.4 Advanced menu
- 3.4.1 Trusted Computing
- 3.4.2 ACPI Settings
- 3.4.3 Redfish Host Interface Settings
- 3.4.4 Onboard LAN Configuration
- 3.4.5 Serial Port Console Redirection
- 3.4.6 SIO Configuration
- 3.4.7 PCI Subsystem Settings
- 3.4.8 USB Configuration
- 3.4.9 Network Stack Configuration
- 3.4.10 NVMe Configuration
- 3.4.11 APM Configuration
- 3.4.12 T1s Auth Configuration
- 3.4.13 Third-party UEFI driver configurations
- 3.5 Platform Configuration menu
- 3.6 Socket Configuration menu
- 3.7 Security menu
- 3.8 Boot menu
- 3.9 Tool menu
- 3.10 Event Logs menu
- 3.11 Server Mgmt menu
- 3.12 Save & Exit menu
- Chapter 4: Driver Installation
- Appendix
2-25
ASUS ESC8000-E11
2.6.4 Installing an expansion card to the rear PCIe
expansion card slots (on select models)
Follow the below instructions to install an expansion card to the rear PCIe expansion card
slots.
PCIe Gen5 x16 link
FH, FL slot for NIC cards
PCIe Gen5 x8 link
FH, FL slot for NIC cards
1. Remove the screws from the metal cover, then remove the metal cover.
3. Align and insert the golden fingers of the PCIe card into the PCIe slot, then secure it
using the screw removed earlier.