User Manual

Chapter 3: Motherboard Information
3-18
9. CPU, AIO pump, front, rear, pump, and extension fan connectors (4-pin CPU_
FAN1-2; 4-pin AIO_PUMP; 4-pin FRNT_FAN1; 4-pin REAR_FAN1; 4-pin PUMP;
5-pin EXT_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
• The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.
• W_PUMP+ function support depends on water cooling device.
• Connect the fan of your water cooling kit to the AIO_PUMP/W_PUMP+ connector.
• DO NOT forget to connect the fan cables to the fan connectors. Insufcient air ow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!
• Ensure that the CPU fan cable is securely installed to the CPU fan connector.