User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Knowing BIOS
- 4.2 BIOS setup program
- 4.3 My Favorites
- 4.4 Main menu
- 4.5 Advanced menu
- 4.5.1 CPU Configuration
- 4.5.2 Platform Misc Configuration
- 4.5.3 System Agent (SA) Configuration
- 4.5.4 PCH Configuration
- 4.5.5 PCH Storage Configuration
- 4.5.6 Serial Port Console Redirection
- 4.5.7 CPU Storage Configuration
- 4.5.8 Onboard Devices Configuration
- 4.5.9 APM Configuration
- 4.5.10 Network Stack Configuration
- 4.5.11 HDD/SSD SMART Information
- 4.5.12 USB Configuration
- 4.5.13 Thunderbolt(TM) Configuration
- 4.5.14 PCH-FW Configuration
- 4.6 Boot menu
- 4.7 Tool menu
- 4.8 Exit menu
- 4.9 Server Mgmt menu
- 4.10 Updating BIOS
- Chapter 5: RAID Configuration
- Appendix
Chapter 2: Hardware Setup
2-20
2.8.1 Installing an expansion card
To install an expansion card:
1. Lay the system on its side on a at, stable surface.
2. Press the PCIe latch (A), hold it by its edge then lift it towards the rear (B).
3. Remove the screw (A) that secures
the metal bracket to the chassis then
remove the metal bracket (B).
Metal bracket
PCIe latch
Edge of the PCIe latch
Screw