User Guide
Table Of Contents
- Notices
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 CPU installation
- 2.3 CPU heatsink and fan assembly installation
- 2.4 System memory
- 2.5 Assembly module
- 2.6 5.25-inch drive
- 2.7 Card reader
- 2.8 Hard disk drives (HDD)
- 2.9 Expansion slots
- 2.10 System fan
- 2.11 BIOS update utility
- 2.12 Motherboard rear and audio connection
- 2.13 Starting up for the first time
- 2.14 Turning off the computer
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- Chapter 5: RAID Configuration
- Appendix
ASUS ESC510 G4
3-7
6. SATADOM power setting (3-pin DOM1_PWR1, DOM2_PWR2)
This jumper allows SATA5 and SATA6 to support SATADOM which do not need external
power connections. Set to pins 2-3 to activate the SATA5 and SATA6 support feature.
• DOM1_PWR1 activates SATA5 support feature.
• DOM2_PWR2 activates SATA6 support feature.