User Guide

Table Of Contents

Chapter 2: Hardware Setup

2-16

2.9.2 Installing M.2 (NGFF) cards

ToinstallanM.2card:

1. LocatetheM.2connector(NGFF1)onthemotherboard.

2. Remove the screw on the stand screw.

3. PreparetheM.2card.

4. AlignandinserttheM.2cardintotheM.2connector(NGFF1).

5. SecuretheM.2cardwiththescrewyouremovedinstep2.

• Pleasepayattentionwhenremovingthescrew,thestandscrewmightberemoved

together with it.

• EnsurethattheM.2cardispositionedbetweenthescrewandthestandscrewbefore

securing it.

Stand screw

Screw

NGFF1

Screw hole