User Guide
Table Of Contents
- Notices
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- 2.1 Chassis cover
- 2.2 CPU installation
- 2.3 CPU heatsink and fan assembly installation
- 2.4 System memory
- 2.5 Assembly module
- 2.6 5.25-inch drive
- 2.7 Card reader
- 2.8 Hard disk drives (HDD)
- 2.9 Expansion slots
- 2.10 System fan
- 2.11 BIOS update utility
- 2.12 Motherboard rear and audio connection
- 2.13 Starting up for the first time
- 2.14 Turning off the computer
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- Chapter 5: RAID Configuration
- Appendix
Chapter 2: Hardware Setup
2-8
2.5 Assembly module
Beforeyoucaninstalla5.25-inchdrive,cardreader,and3.5”HDD,youshouldrstremove
the front panel cover and assembly module.
Ensuretounplugthepowercablebeforeinstallingorremovinganysystemcomponents.
Failuretodosomaycausedamagetothemotherboardandothersystemcomponents!
2.5.1 Removing the assembly module
To remove the assembly module:
1. Locate the front panel cover latches and lift both latches gently to remove the front
panel cover.
2. Pulltheassemblymodulelocktowardsthefront(A)toreleasetheassemblymodule
fromthechassis,thenlifttheassemblymoduletoremoveit(B).