User Manual

華碩 ESC500 使用手冊
4-19
4.5.4 PCH 設定（PCH Configuration）
High Precision Timer [Enabled]
本項目可以讓您啟動或關閉 High Precision Event Timer 功能。設定值有：
[Enabled] [Disabled]。
4.5.5 SATA 裝置設定（SATA Configuration）
當您進入 BIOS 設定程式時，BIOS 設定程式將自動偵測已安裝的 SATA 裝
置。當未偵側到 SATA 裝置時將顯示 Not Present。
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
Enabled/Disabled the High Precision
Event Timer.
Back Advanced\ PCH Conguration >
EFI BIOS Utility - Advanced Mode
PCH Chipset Conguration
High Precision Timer Enabled
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
(1) IDE Mode. (2) AHCI Mode. (3)
RAID Mode.
Back Advanced\ SATA Conguration >
EFI BIOS Utility - Advanced Mode
Version 2.00.1201. Copyright (C) 2011 American Megatrends, Inc.
SATA Conguration
SATA Mode IDE Mode
Serial-ATA Controller 0 Enhanced
Serial-ATA Controller 1 Enhanced
S.M.A.R.T. Status Check Enabled
SATA6G_1 (Gray) Not Present
SATA6G_2 (Gray) Not Present
SATA3G_3 (Blue) ASUS CB-521 ATAPI
SATA3G_4 (Blue) Not Present
SATA3G_5 (Blue) Not Present
SATA3G_6 (Blue) Not Present