User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 AMD CBS
- 4.5.3 Onboard LAN Configuration
- 4.5.4 Serial Port Console Redirection
- 4.5.5 CPU Configuration
- 4.5.6 PCI Subsystem Settings
- 4.5.7 USB Configuration
- 4.5.8 Network Stack Configuration
- 4.5.9 NVMe Configuration
- 4.5.10 SATA Configuration
- 4.5.11 APM Configuration
- 4.5.12 AMD Mem Configuration Status
- 4.5.13 T1s Auth
- 4.5.14 Driver Health
- 4.6 Chipset menu
- 4.7 Security menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Event Logs menu
- 4.11 Server Mgmt menu
- 4.12 Exit menu
- Chapter 5: Driver Installation
- Appendix
2-47
ASUS ESC4000A-E12
GPU bracket opening
8. Insert the GPU cables into the opening on the GPU bracket.
9. Align and insert the golden fingers of the GPU card into the card slot on the bracket
and ensure that it is securely seated in the slot.
10. Secure the GPU card and air duct assembly to the GPU bracket.
For GPU card installation with an air duct
Secure the GPU card and air duct to the GPU bracket with a screw, then install the
PCIe lock and secure the two thumbscrews.
For GPU card installation without an air duct
Install the PCIe lock and secure the two thumbscrews.
11. Repeat steps 4 to 10 if you need to install an additional GPU card to the bracket.