User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 AMD CBS
- 4.5.3 Onboard LAN Configuration
- 4.5.4 Serial Port Console Redirection
- 4.5.5 CPU Configuration
- 4.5.6 PCI Subsystem Settings
- 4.5.7 USB Configuration
- 4.5.8 Network Stack Configuration
- 4.5.9 NVMe Configuration
- 4.5.10 SATA Configuration
- 4.5.11 APM Configuration
- 4.5.12 AMD Mem Configuration Status
- 4.5.13 T1s Auth
- 4.5.14 Driver Health
- 4.6 Chipset menu
- 4.7 Security menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Event Logs menu
- 4.11 Server Mgmt menu
- 4.12 Exit menu
- Chapter 5: Driver Installation
- Appendix
Chapter 2: Hardware Setup
2-24
8. Insert the PIKE II or RAID card into the internal bracket, then secure it using the screw
you removed earlier.
7. (Optional) To install an ASUS PIKE II 3108 RAID card and cache vault, follow the
below instructions to install the cache vault add-on card:
b. Align and install the bundled cache
vault add-on card onto the connector
on the ASUS PIKE II card, then
secure it to the two spacers with
two screws.
c. Connect the bundled power cable
to the cache vault add-on card.
a. Align the two spacers with the
screw holes on the ASUS PIKE II
card, then secure the two spacers
with two screws from the bottom of
the card.