User Manual

Chapter 2: Hardware Setup
2-20
2.5.2 Installing an OCP3.0 slot baseboard
The onboard PCI Express slot on the motherboard comes pre-installed with a riser card that
supports an OCP3.0 slot baseboard.
1. Remove the riser card, then remove the PCIe lock and metal covers.
Refer to the
Installing a PCIe expansion card
section for the steps on removing the riser
card, PCIe lock, and metal covers.
2. Prepare the OCP3.0 slot baseboard and insert the golden finger connectors into the
PCIe connectors on the riser card as shown.
2
3
3. Replace the metal covers for any unused PCIe slots, then secure the PCIe lock using
the screw removed earlier.
2
3
4. Connect
OCP_SIDE1
and
OCP_NCSI1
on the OCP3.0 slot baseboard to
OCP_SIDE1
and
OCP_BUS1
on the riser card using the bundled cables.
5. Align and insert the riser card and expansion card assembly into the PCIe slot on the
motherboard.