User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Information
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 PSP Firmware Versions
- 4.5.3 APM Configuration
- 4.5.4 Onboard LAN Configuration
- 4.5.5 Serial Port Console Redirection
- 4.5.6 CPU Configuration
- 4.5.7 PCI Subsystem Settings
- 4.5.8 USB Configuration
- 4.5.9 Network Stack Configuration
- 4.5.10 CSM Configuration
- 4.5.11 NVMe Configuration
- 4.5.12 SATA Configuration
- 4.5.13 AMD Mem Configuration Status
- 4.6 Chipset menu
- 4.7 Security menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Event Logs menu
- 4.11 Server Mgmt menu
- 4.12 Exit menu
- Chapter 5: Driver Installation
- Appendix
4-10
Chapter 4: BIOS Setup
4.4 Performance Tuning menu
The Performance Tuning menu items allow you to change performance related settings for
different scenarios.
Optimized Performance Setting [Default]
Allows you to select performance settings for different scenarios.
[Default] Default settings.
[By Benchmark] Optimize for different kinds of benchmarks. Select this option, then select a
benchmark type from the
>>
list.
[By Workload] Optimize for different kinds of workloads. Select this option, then select a
workload type from the
>>
list.
The following item appears only when
Power Balancer
is set to
[Disabled]
.
Core Optimizer [Disabled]
Allows you to keep the processor operating at the turbo highest frequency for
the maximum performance. For Windows Server 2019, please set
Powercfg /
setacvalueindex scheme_current sub_processor perfautonomous 1
&
Powercfg /setactive scheme_current
to enable this feature. For Linux, please
set
cpupower frequency-set -g performance
.
Configuration options: [Disabled] [Enabled]
Linux support may vary by version of the OS.
The following item appears only when
Optimized Performance Setting
is set to
[Default]
.
Engine Boost [Disabled]
Enable this item to boost the CPU's frequency.
Configuration options: [Disabled] [Enabled]
Operate with an ambient temperature of 25
o
C or lower for optimized performance.