User Manual
Table Of Contents
- Safety information
- Chapter 1: Product Introduction
- Chapter 2: Hardware Setup
- Chapter 3: Motherboard Infomation
- Chapter 4: BIOS Setup
- 4.1 Managing and updating your BIOS
- 4.2 BIOS setup program
- 4.3 Main menu
- 4.4 Performance Tuning menu
- 4.5 Advanced menu
- 4.5.1 Trusted Computing
- 4.5.2 PSP Firmware Versions
- 4.5.3 APM Configuration
- 4.5.4 Onboard LAN Configuration
- 4.5.5 Serial Port Console Redirection
- 4.5.6 CPU Configuration
- 4.5.7 PCI Subsystem Settings
- 4.5.8 USB Configuration
- 4.5.9 Network Stack Configuration
- 4.5.10 CSM Configuration
- 4.5.11 NVMe Configuration
- 4.5.12 SATA Configuration
- 4.5.13 AMD Mem Configuration Status
- 4.5.14 iSCSI Configuration
- 4.6 Chipset menu
- 4.7 Security menu
- 4.8 Boot menu
- 4.9 Tool menu
- 4.10 Save & Exit menu
- 4.11 AMD CBS menu
- 4.12 Event Logs menu
- 4.13 Server Mgmt menu
- Chapter 5: Driver Installation
- Appendix
Chapter 2: Hardware Setup
2-38
Standard chassis screw (A) #6-32 X L 4.2 OD 6mm 6.0±0.5 kgf-cm
GPU support screw (B) #6-32 X L 4.76 OD 8mm 6.0±0.5 kgf-cm
9. Align and insert the golden fingers of the GPU card into the card slot on the bracket
and ensure that it is securely seated in the slot.
10. Secure the GPU card and air duct assembly to the GPU bracket.
For GPU card installation with an air duct
Secure the GPU card to the GPU bracket with two standard chassis screws, then
secure the air duct using one GPU support screw.
For GPU card installation without an air duct
Secure the GPU card to the GPU bracket with one or two GPU support screws
depending on the type of GPU card.
11. Repeat steps 4 to 10 if you need to install an additional GPU card to the bracket.
GPU support screw (B)
GPU support screw (B)
Standard chassis screw (A)
The GPU support screws are bundled in the accessory bag. Contact your retailer if any
screws are missing.