User Manual

Table Of Contents
Chapter 2: Hardware Setup
2-34
2.8.4 U.2 drives
1
2
Storage device bay 5 and 6
To install a U.2 drive:
1. Install the U.2 drive to storage device bay 5 or 6.
Refer to the
Installing the 2.5-inch SSD
section for the steps on installing a 2.5-inch drive
to the HDD bay.
2. Remove the slimline SAS cables from the internal SAS/HBA/Storage bracket.
Additional U.2 drives may be installed in storage device bays 5 and 6 as shown in the
illustration below: