User Manual

5-44
Chapter 5: BIOS Setup
NTB Enable [Auto]
This item allows you to enable NTB.
Configuration options: [Auto] [Enable]
The following item appears only when
NTB Enable
is set to
[Enable]
.
NTB Location [Auto]
Configuration options: [Auto] [Socket0-Die0] [Socket0-Die1] [Socket0-Die2] [Socket0-Die3]
[Socket1-Die0] [Socket1-Die1] [Socket1-Die2] [Socket1-Die3]
NTB active on PCIeCore [Auto]
Configuration options: [Auto] [Core0] [Core1]
NTB Mode [Auto]
This item allows you to select the NTB Mode (Core 0, Port 0)
Configuration options: [NTB Disabled] [NTB Primary] [NTB Secondary] [NTB Random] [Auto]
5.11.5 NTB Common Options
Enable Rcv Err and Bad TLP Mask [Auto]
This item allows you to enable masking of receiver error and bad TLP at Gen4 x2.
Configuration options: [Disabled] [Enabled] [Auto]
Early Link Speed [Auto]
This item allows you to set Early Link Speed.
Configuration options: [Auto] [Gen1] [Gen2]
Hot Plug Handling mode [Auto]
This item allows you to control the Hot Plug Handling mode.
Configuration options: [A0 Mode] [OS First (No Error Handling)] [OS First (Error Handling -
Not Implemented)] [Firmware First (Not Implemented)] [Auto]
Presence Detect Select mode [Auto]
This item allows you to control the Presence Detect Select mode.
Configuration options: [OR] [AND] [Auto]
Loopback Mode [Auto]a
This item allows you to enable or disable PCIe Loopback mode.
Configuration options: [Disabled] [Enabled] [Auto]
CV test [Auto]
Set this item to
[Enabled]
to support running PCIECV tool.
Configuration options: [Disabled] [Enabled] [Auto]