User Manual

Copyright © 2022 King Slide. All Rights Reserved
Electronic File
Remove the chassis from rack
①
②
Remove shipping screws.or
P
thumb screw
ull out chassis.
③④ Press the white disconnect tab forward to remove chassis.
①
②
③④
①
②
④
Warm remind. Without thumb screw on the chassis and under the condition of no shipping requirement, user can
fasten the screw on the front bracket.
Ⓓ
Click!
Blue
➌
➋
➊
➍
➎
(D)M5x20.0L-P0.8
➊
➋
➌
Remove the pre-installed screw .
CAUTION! Verify ball bearing retainer is locked forward.
Horizontally install system half way into slide rail.
Ⓕ
➍
➎
Slide the blue release tab and push system into rack.
Tighten chassis with screw .
Ⓓ
or
PullWhite
③
(D)M5x20.0L-P0.8
R