User Manual

5-37
ASUS ESC4000A-E10
RCD Parity [Auto]
Configuration options: [Enabled] [Disabled] [Auto]
DRAM Address Command Parity Retry [Auto]
Configuration options: [Enabled] [Disabled] [Auto]
The following item appears only when
DRAM Address Command Parity Retry
is set to
[Enabled]
.
Max Parity Error Replay [8]
The values in hex, 1, 2, or 3 is invalid.
Configuration options: [0] - [39]
Write CRC Enable [Auto]
Configuration options: [Enabled] [Disabled] [Auto]
DRAM Write CRC Enable and Retry Limit [Auto]
Configuration options: [Enabled] [Disabled] [Auto]
The following item appears only when
DRAM Write CRC Enable and Retry Limit
is set to
[Enabled]
.
Max Write CRC Error Replay [8]
The values in hex, 1, 2, or 3 is invalid.
Configuration options: [0] - [39]
Disable Memory Error Injection [True]
Configuration options: [False] [True]
ECC Configuration
DRAM ECC Symbol Size [Auto]
Configuration options: [x4] [x8] [x16] [Auto]
DRAM ECC Enable [Auto]
This option allows you to enable or disable DRAM ECC. Auto will set ECC
to enable.
Configuration options: [Disabled] [Enabled] [Auto]
DRAM UECC Retry [Auto]
This option allows you to enable or disable DRAM UECC Retry.
Configuration options: [Disabled] [Enabled] [Auto]
Security
TSME [Auto]
Configuration options: [Disabled] [Enabled] [Auto]
Data Scramble [Auto]
Configuration options: [Disabled] [Enabled] [Auto]
DRAM Memory Mapping
Chipselect Interleaving [Auto]
This item allows you to set interleave memory blocks across the DRAM chip selects for
node 0.
Configuration options: [Disabled] [Auto]
BankGroupSwap [Auto]
Configuration options: [Enabled] [Disabled] [Auto]